plaver
Junior Member
Posts: 75
|
Post by plaver on Dec 22, 2020 0:08:09 GMT
Can the left rear view mirror be lowered when reversing as with the right?
Is that the right if I have it activated, but the left I do not know if it will.
Cheers
|
|
|
|
Post by vwjap on Dec 22, 2020 17:58:05 GMT
You could try it drivers door - long coding- byte 4- enable bit 2 & 3
But they won’t operate together as the mirror switch needs to be on the dip side (passenger)
|
|
|
|
Post by jurucavw on Dec 23, 2020 10:04:18 GMT
Good Idea!  I think this can work because right hand drivers must code the other door module. |
|
|
|
Post by vwjap on Dec 23, 2020 10:17:25 GMT
Maybe all down the the module in the drivers door, I’d do the dv52 check to see it has a memory module tho too
|
|
|
|
Post by dv52 (Australia) on Dec 23, 2020 23:39:45 GMT
Good Idea! I think this can work because right hand drivers must code the other door module. hmm........I'm more than delighted to be proven wrong, but my suspicion is that the firmware in the hex09 module only permits "mirror-dip" on the passenger side of the car - defined as either the left, or right side, depending on which side the steering wheel is installed.
I don't believe that it's possible to simply code the driver's door module for mirror-dip and place the mirror button to the driver-side position and have the function operate on the driver mirror. But if someone wants to try - I'm happy to be proven wrong!!
Don
|
|
