|
|
Post by poormxdad on Dec 21, 2020 21:33:47 GMT
Folks,
Greetings. First post. Novice user but I've had the dongle for about two years.
2007 Audi S4 6MT. My profile says I have the Pro version. Software version 0.31.2(10311).
I want to code in my new battery (whether or not it is necessary to do so) but the Gateway, Module 19, is not present in my list of modules. Autocode gateway list says "Show". How do I get Module 19 to appear?
Thanks and Merry Christmas to one and all,
poormxdad
|
|
|
|
Post by olive972 on Dec 29, 2020 0:53:13 GMT
I have the same problem. I can not register my new battery with the nextgen
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Dec 29, 2020 13:46:29 GMT
You need to upgrade to v0.31.3 which has a fix for this bug.
If you are downloading from Huawei app site they have still not updated it but promise to do it soon.
|
|
|
|
Post by olive972 on Dec 29, 2020 15:57:16 GMT
OK, thanks. I have actually updated the application. I will try this evening because yesterday I did not have the adaptation item.
|
|
|
|
Post by poormxdad on Dec 29, 2020 16:22:09 GMT
That's interesting. When I originally posted, I had v0.31.2. Now my Android phone says I have 0.31.3. I'll give it a try later.
Thanks,
poormxdad
|
|
|
|
Post by olive972 on Dec 29, 2020 20:49:33 GMT
I tried a new one,
I did :
control units
gateway module 19
in the list I do not have the adaptation item. I have long coding, long adaptation, basic sittings, output test .... subsystems ..... no adaptation. I do not understand. is there a way to register the new battery with a coding?
|
|
|
|
Post by poormxdad on Dec 29, 2020 22:21:33 GMT
Didn't work for me either. I spent 25 minutes in the car with it running. I went through the scan a bunch of times, restarted the phone twice, etc., etc. No joy. I still do not see Module 19. I followed (or tried to follow) the "Gateway Coding" tutorial from the Help function, but could not make it work.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Dec 30, 2020 9:34:25 GMT
Not my car but olive972 what age is your car as it sounds like its an older model that does not have Adaptation but has Long adaptation, afraid I dont have coding for your car so you will have to do some searching. If you go to Info in Control unit 19 and check under Protocol it should say something like KWP2000 which is the older style. I stress i dont know your car but if you go to Long adaptation it should bring up a screen with Enter Channel and a drop down list of Select value On an older car in my garage (but not your model) in this list i have one called Battery adaptation which is where i am guessing you change the values for new battery. poormxdad as above I dont know your car but couple questions. 1/ Just to double check have you got the latest release 31.3 2/ When you run a scan does it show control unit 19 3/ following voltas-it.helpshift.com/a/obdeleven-android/?p=android&s=application-usage&f=gateway-coding&l=en with the ignition on you should have the option to add in manually a control unit, using the red pen can you add back in control unit 19 from the drop down list or does it not appear Very boring but you must have good internet connection and location finder turned on. |
|
|
|
Post by poormxdad on Dec 30, 2020 13:14:37 GMT
testeronline, Thanks for chiming in.
To clarify, I do have 31.3 and when I run a scan, Control Unit 19 does not appear. Location is ON.
When you stated "with the ignition on" does that mean with the car NOT running? I've seen those directions before, but have never been able to make it work, WITH THE CAR RUNNING.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Dec 30, 2020 14:21:11 GMT
poormxdad ignition on means just the key turned but no engine running. As I say I do not know your car but I have had a look on some VCDS Sites and I found examples of 2007 cars with no control unit 19, Might be worth dropping a line to OBD11 Support via the in app help function to see if they can confirm.
|
|
|
|
Post by olive972 on Dec 30, 2020 19:19:06 GMT
my car is from 2016. audi s1. battery must be registered
|
|
|
|
Post by olive972 on Dec 30, 2020 19:25:14 GMT
I have the menu or there is screen with Enter Channel and a drop down list of Select value
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Dec 30, 2020 21:12:44 GMT
Afraid I dont have an S1 in my Garage, when you select control unit 19
You said you get long coding, long adaptation, basic sittings, output test .... subsystems ..... no adaptation.
you can do this offline what do you get when you select long adaptation
|
|
|
|
Post by olive972 on Dec 31, 2020 11:42:08 GMT
Hi. when i go into long adaptation its asking me entered the value
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Dec 31, 2020 12:50:21 GMT
As I say dont have one of your cars in my garage. But on an old Passat I have it shows the following
1/ Firstly it brings up this screen
then from the dropdown list you get this
do you have the drop down list option
Just to stress I do not have access to one of these cars but saw the following on VCDS Site which may be relevant to your car.
Long Adaptation
Installation of a new battery requires the use of the [Long Adaptation-0A] function under 19-CAN-Gateway control module. Follow the on-screen instructions to enter the Part Number, Vendor, and Serial Number all as one long new value.
[Select]
[19 - CAN-Gateway]
[Long Adaptation-0A]
Channel 004
[Read]
VCDS will populate instructions in the form of a pop-up balloon with the formatting. For example:
Format: NNNNNNNNNNN XXX ZZZZZZZZZZ
N = Battery Part Number (11 Digits)
X = Battery Vendor (3 Digits)
Z = Battery Serial Number (10 Digits)
|
|
|
|
Post by olive972 on Jan 1, 2021 14:24:44 GMT
happy new year and best wishes to you.
ok thank you. I will try.
|
|
