Post by zabes64 on Dec 16, 2020 20:23:18 GMT
Trying to add Auto Hold to my US 2020 Tiguan (without SFD), when I try to long code byte 23, I get 31 - Function Not Available
People with VCDS are able to make this change.
I'm using first generation OBDeleven.
I've tried coding it with the bonnet open, engine off, engine on, different security codes, different service types (VW, Development, etc), I've checked live data and it notices when I push the button, as the data for the light goes from Off to (blank) then bank to Off, so it is detecting the push of the button.
Was able to change adaptations, but apparently ABS brakes cannot be long coded with this.
People with VCDS are able to make this change.
I'm using first generation OBDeleven.
I've tried coding it with the bonnet open, engine off, engine on, different security codes, different service types (VW, Development, etc), I've checked live data and it notices when I push the button, as the data for the light goes from Off to (blank) then bank to Off, so it is detecting the push of the button.
Was able to change adaptations, but apparently ABS brakes cannot be long coded with this.
