alvii
Closed beta tester
Posts: 10
|
Post by alvii on Dec 14, 2020 22:12:11 GMT
Hey all
I've coded the static cornering lights on my 2018 a3
They function as expected when turning the steering wheel , however I cannot for the life of me figure out how to keep them on when I turn the indicator on it switches off until the indicator turns off.
I've searched for answers but cannot find it
Any guidance ?
|
|
|
Post by dv52 (Australia) on Dec 14, 2020 22:15:05 GMT
alvii : hi I'm confused - please explain what you want again - using different words!! Don
|
|
alvii
Closed beta tester
Posts: 10
|
Post by alvii on Dec 15, 2020 2:49:01 GMT
Hi sorry!
I've enabled the static cornering lights
Ie. The lights that turn on within headlamp when turning the steering wheel to illuminate more of the road
The problem I face is when I'm steering and these lights turn on, as soon as I put on my indicator/blinker the cornering light turns off
When the indicator/blinker turns off the cornering light turns on again
What I want to achieve is the cornering light activated by steering angle and remain on even when there is an indicator/blinker on
|
|
|
Post by dv52 (Australia) on Dec 15, 2020 4:23:38 GMT
alvii : hmm........ OK, now I understand - thanks for clarifying.
Try this: Leuchte12NL LB45-Lichtfunktion G 12 only if the current setting is Blinken links aktiv (beide Phasen), change to nicht aktiv
Leuchte13NL RB5-Lichtfunktion G 13 only if the current setting is Blinken rechts aktiv (beide Phasen), change to nicht aktiv
Don
|
|
alvii
Closed beta tester
Posts: 10
|
Post by alvii on Dec 16, 2020 5:38:28 GMT
You absolute legend Don!
That did the trick they even turn on when I turn the indicator on without having to turn wheel
Thanks so much !
|
|
somi
New Member
Posts: 2
|
Post by somi on Apr 16, 2021 21:41:16 GMT
Hi,do you mean cornering lights on matrix headlights? If so,could you tell me how did you code that in? Thanks!
|
|
|
Post by dv52 (Australia) on Apr 16, 2021 22:36:14 GMT
somi : The "cornering lights" in alvii car is what the Audi A3/8V calls "allweather lights". On my HID fittings, these are incandescent lamps that point sideways - to illuminate the peripheral area either side of the car front.
To confirm if your matrix headlights have allweather lamps (and if they can be used as static cornering lights), post-up screenshots of Leuchte12NL LB45. To be clear - I need to see ALL 19 x channel values for this Leuchte-set.
Don
|
|
somi
New Member
Posts: 2
|
Post by somi on Apr 17, 2021 7:27:35 GMT
The car is not mine,it's my buddy's,when i hook it up i will post it..thanks anyways!
|
|
|
Post by kcurpen on Jun 29, 2022 4:57:37 GMT
Hi dv52
I tried this too on my A3 Facelift fitted with Xenon headlights, and it worked perfectly well. Do you know how to enable the both same cornering lights when reversing, that is when putting the gear in reverse. I had this option in my old VW Passat B7, that is when headlights (low beam) is ON, and I put the gear in reverse, both all weather lights goes ON. Thanks
|
|
|
Post by dv52 (Australia) on Jun 29, 2022 10:39:11 GMT
kcurpen : hi. OK, I think we need to make a clear distinction between the native "cornering lights" and the "Allweather" lights.
To make the allweather lights illuminate when reverse gear is selected, do this:
Leuchte13NL RB5 and Leuchte13NL RB5 Leuchte12NL LB45
- Lichtfunktion G - ONLY if the current value is nicht aktiv, change to Rückfahrlicht
- Dimmwert GH - ONLY if the current value is 0, change to 100
Note: this tweak will illuminate the allweather lights when reverse gear is selected - regardless of whether the low-beam lights are switched-on
To make the native cornering lights illuminate when reverse gear is selected, do this in the central electrics module: - static AFS light-bei Rueckwaertsfahrt change from OFF to Both sides.
Note: this tweak will illuminate the cornering lights when reverse is selected - only when the low-beam lights are switched-on
Don
|
|
|
Post by kcurpen on Jun 29, 2022 11:21:29 GMT
Hi Don
Thanks for your quick response, is this correct in your last post
Leuchte13NL RB5 and Leuchte13NL RB5
or should it be Leuchte13NL RB5 and Leuchte12NL LB45 Thx to confirm.
|
|
|
Post by kcurpen on Jun 29, 2022 15:07:38 GMT
Hi Don
Thanks,you are too good mate,I've done the changes, and it all works perfectly well,cornering lights stay ON when turn signal is ON, and also both cornering lights go ON with reverse gear.
One last thing, how can I set the cornering lights to fade out slowly when going OFF.
Thanks in advance
|
|
|
Post by dv52 (Australia) on Jun 29, 2022 22:00:48 GMT
kcurpen : Yes - my bad, I've fixed my sloppy post - thanks To modify the ramp-off time for the cornering lights try static AFS light-Abdimmgeschwindigkeit - which means in English "Static Advance Frontlighting System - Dimming speed"
The units for the value in this channel are percentage-per-second and the default factory value is 50.0 %/s. I'm not sure, but there might be a range limit - so try small variations at first.
Don
|
|
|
Post by kcurpen on Jul 1, 2022 4:38:20 GMT
dv52: Hi Don
Tried to change the dimming %, and it was great, I have set it to 125%/s, which was the max acceptable, and the cornering lights fade out smoothly just as I wanted. Thanks again for your precious assistance, well appreciated.
|
|
|
Post by dimasarwi on Jun 17, 2024 1:02:28 GMT
alvii : hmm........ OK, now I understand - thanks for clarifying.
Try this: Leuchte12NL LB45-Lichtfunktion G 12 only if the current setting is Blinken links aktiv (beide Phasen), change to nicht aktiv
Leuchte13NL RB5-Lichtfunktion G 13 only if the current setting is Blinken rechts aktiv (beide Phasen), change to nicht aktiv
Don
Hii, Don! I have the same purpose with Alvii for my VW Tiguan 2013 and I use Obdeleven also. Could you plaese translate this adaptation from MQB to PQ35M? Thank you Don
|
|
|
Post by dv52 (Australia) on Jun 17, 2024 3:38:29 GMT
dimasarwi : Hi. PQ35 Platform cars were the predecessor for the newer MQB platform. I'm not that familiar with early Tiggys - but I understand that it's a common misconception that they were built on a PQ35 platform.
PQ35 platform cars like the mk5 and mk6 Golf were designed as entry-level vehicles whereas mid-level cars like the 5N Tiggy had a PQ46 platform
Anyhow, as for your question - it's NOT possible to translate my suggested MQB tweak to either PQ35, or PQ46 platform cars!
"Leutche-programming" was introduced into first generation MQB platform cars - there simply isn't an equivalent facility in earlier model cars - Alas!
Don't get me wrong, I'm NOT saying that the change can't be done to a 5N Tiggy - rather, I'm saying that it can't be done with Leuchte-programming!!
Don
|
|
|
Post by aldmit on Jun 17, 2024 6:48:48 GMT
alvii : hmm........ OK, now I understand - thanks for clarifying.
Try this: Leuchte12NL LB45-Lichtfunktion G 12 only if the current setting is Blinken links aktiv (beide Phasen), change to nicht aktiv
Leuchte13NL RB5-Lichtfunktion G 13 only if the current setting is Blinken rechts aktiv (beide Phasen), change to nicht aktiv
Don
Hii, Don! I have the same purpose with Alvii for my VW Tiguan 2013 and I use Obdeleven also. Could you plaese translate this adaptation from MQB to PQ35M? Thank you Don For PQ35 try The Corner function only works at speeds up to 40 km/h and in conjunction with low beam. There are 2 options: A – activation depending on the position of the steering sensor; B – activation depending on the position of the steering sensor and the turn signals on. Module 09 → Long Coding: Byte 14 – Bit 0: active Byte 14 – Bit 7: active A) Byte 17 – Bit 0: not active B) Byte 17 – Bit 0: active
|
|