|
Post by vippolito on Dec 7, 2020 20:33:22 GMT
HI, As i retrofitted dynaudio on my golf 4motion facelift 2018 i bought a new 5f 3q0035874c with dab instead of 864c that i had before.
This have been activated from official service vw but the 5f comes from a GTE passat and have all hybrid features and menu inside. My golf is 2.0 td 4 motion...... and i would like to uncode the features of hybrid as my car don't have. There is someone can help me?
|
|
|
Post by vwjap on Dec 7, 2020 21:45:10 GMT
I think there’s a couple of places you may need to go to, one might be
Car_Function_Adaptations_Gen2: menu_display_hybrid: Not activated menu_display_hybrid_clamp_15_off: Not activated menu_display_hybrid_over_threshold_high: Not activated menu_display_hybrid_standstill: Not activated menu_display_hybrid_after_disclaimer: Not activated
And the other could be
Car_Function_List_BAP_Gen2: Hybrid_0x1D: Not activated Hybrid_0x1D_msg_bus: Databus drivetrain
But as I’ve never done it I can’t tell you if I’m right or you need to deactivate anything else
|
|
|
Post by alex480257 on Dec 15, 2020 16:00:45 GMT
Hello i do all your code but the menu still on thé discover
|
|
|
Post by vwjap on Dec 15, 2020 16:32:26 GMT
You could also try the menu display battery management
|
|
|
Post by dv52 (Australia) on Dec 15, 2020 23:13:12 GMT
alex480257: hopefully you had the good sense to make back-up files for both the old and new MIBs. If so, try changing Bytes 0-2 on your new MIB to the values on your old MIB.
|
|