|
|
Post by thorwald on Mar 18, 2023 8:18:55 GMT
Thank you canbiz! Haha, I thought you ment a "HMI coding" or "adaption" setting  |
|
|
|
Post by skylex95 on Mar 22, 2023 20:19:14 GMT
Hello, does anyone know the coding to deactivate the open door alarm?
|
|
|
|
Post by thelivinglegend on Mar 24, 2023 19:45:11 GMT
I managed to get the powerdisplay and torquedisplay visible on my dashboard. (SEAT Leon ST (KL) 1.5 TSI 96 kWh manual gearbox) Now both power and torque are displayed in percentages. Can I also get this information in absolute values?  |
|
|
|
Post by thelivinglegend on Mar 24, 2023 19:57:17 GMT
Hello, does anyone know the coding to deactivate the open door alarm? I think you are looking for this:
Warning sound when opening the door if ignition is active deactivate - Select control unit 09 - Select Adaptation
- Select Clamp_Control - Select Ignition_Active_Message - Set No_display
|
|
RV21
New Member
Posts: 4
|
Post by RV21 on Mar 25, 2023 10:08:51 GMT
I managed to get the powerdisplay and torquedisplay visible on my dashboard. (SEAT Leon ST (KL) 1.5 TSI 96 kWh manual gearbox) Now both power and torque are displayed in percentages. Can I also get this information in absolute values? Can't help you with your question (don't even know how you managed to display this, couldn't figure this out yet), but interesting to see it also changed your redline on the rev counter. It should be around 6000 rpm by default. Or is this a separate setting you updated? |
|
|
|
Post by thelivinglegend on Mar 26, 2023 18:22:27 GMT
You can activate the engine power display and torque display this way:
> Select Control Unit 17 (Dashboard) > Select Long Coding > Select Vehicle Variant > Set Derivative 4 - (Hatchback) > Set Derivative 6 - (Sportstourer) > Adaptation > Configuration of displayable contents > Set Transmission temperature -> active > Set G-Meter -> active > Set Engine power display -> active > Set Engine torque display -> active
As for the red line for the tachometer, I didn't notice that it moved from 6,000 rpm to 6,500 rpm.
|
|
RV21
New Member
Posts: 4
|
Post by RV21 on Mar 27, 2023 7:55:35 GMT
As for the red line for the tachometer, I didn't notice that it moved from 6,000 rpm to 6,500 rpm.
Thanks for sharing! Rev counter red line probably moved because of the modification of the vehicle variant; 4 and 6 are for Cupra models, which has the redline a bit higher. Can also be seen in the Cupra dash view (with the rev counter centered), redline also around 6500 there. |
|
|
|
Post by takvor on Apr 8, 2023 18:13:05 GMT
Hi All,
Q1:
==
I am trying to activate HighBeam Assist in Leon Sportstourer 2.0 TDI MY.2022. Teted two approaches but encountered the following issues, marked with "-> <-";
09 - Central electrics - Security access 31347 -> NOT ACCEPTED <-
------------------
Adaptation FernlichtAssistent -> ACCEPTED
Menusterung Fernlichtassisten: from Not_Present -> Present
Menusterung Fernlichassisten werkseinstellung -> Present
LCM -> FUNCTION NOT AVAILABLE <-
----------------------------
Expanded high beam control -> AFS, FLA, Fernlicht uber AFS
Licht_bedienung ?
A5 - Driver Assistance - Long coding -> ACCEPTED
AFS_Coding_Light_Assist
from no_Light_Assist -> High_Beam_assist
High_BeamAssist_Behaviour
from Variant_1 -> Variant_2
Dynamic Light Assist (DLA) (option two)
---------------------------------------
A5 - Front Sensor - security access: "20103" - Long Coding -> FUNCTION NOT AVAILABLE <-
----------------------------
byte 19 - bit 0-3 value 00
byte 19 - bit 4-7 value 30 -> 1111 0000 is F0 not 30 <-
----------------------------
byte 21 - change it to hex value 40 -> should be 0100 0000 - bit 6 <-
---------------------------------
09 - Central Electric - security access: "31347" - Adaptation
change "Erweiterte Fernlichtsteuerung" to "AFS FLA Fernlicht (GLW:MDF)"
change "Menusteuerung Fernlichtassistent" to "Present"
change "Menusteuerung Fernlichtassistent Worksteinstellung" to "Present"
After doing this, the "DLA" option should have appeared in the "Light" menu in the vehicle settings.
4B - Multifunction Module - security access: "20103" or "20113" - Long Coding -> n.a. - four in 19 - CAN Gateway Install List <-
--------------------------------------------------
byte 9 - change the hex value to 10.
byte 10 - bit 6 Enable. (Make sure bit 5 is unticked)
byte 11 - bit 2 Enable.
Any help is appreciated.
|
|
|
|
Post by takvor on Apr 8, 2023 18:18:59 GMT
Q2:
==
Can someone share the whole procedure for activating ACC on Leon Sportstourer 2.0 TDI MY.2022?
The vehicle is equipped with standard cruise control. Camera and radar are available, and the steering wheel can be adapted with replacement.
|
|
C4NB!Z
Junior Member
Posts: 84
|
Post by C4NB!Z on Apr 13, 2023 6:45:29 GMT
Q1 A5 & 09 dont have security accesses, thats only for older MQB models.
-> LCM First: "Fernlichtassistent" not yours
The rest is just absolutely unreadable, convoluted, etc.
I have no idea what you're throwing in here for values.
Q2
What exactly do you want to know here?
You set the ACC in A5 to "Coded" by coding.
|
|
|
|
Post by takvor on Apr 15, 2023 13:25:14 GMT
Thank you for your answer. I shall try to clarify.
Q2 - ACC - I want to activate Adaptive Cruise Control in a vehicle equipped with a "standard" not adaptive one. The option you mentioned is active, but trying to follow procedures from posts in this thread did not produce desired results. Altthough I have radar installed, this post "https://forums.ross-tech.com/index.php?threads/23182/post-201804" about radar usage by ACC, confuses me..
Q1 - High Beam Assist - My goal is to activate High Beams Assistant. I tried two options. First one is from page 9 of this thread, the other one uses directly long coding bytes. Both did not work. I assume that FoD for this assistant should be also activated. Please, refer to "https://forum.obdeleven.com/post/74531/thread" about FoD/FeC/SWaP.
If you are aware of procedures that could lead to desired activations, please, share them. Thank you.
|
|
|
|
Post by seatmk4 on Apr 16, 2023 17:53:01 GMT
Hello Guys,
I'm looking for the coding for DRL with fog lights.
I would like to coding it step to step and not with a "App".
Has anybody it?
My second question is, if there anywhere a PDF file with all codings?
thx
|
|
C4NB!Z
Junior Member
Posts: 84
|
Post by C4NB!Z on Apr 16, 2023 18:51:48 GMT
Hello Guys, I'm looking for the coding for DRL with fog lights. I would like to coding it step to step and not with a "App". Has anybody it? My second question is, if there anywhere a PDF file with all codings? thx 1. Do you mean the fog lights in addition to the DRL or instead of the DRL? 2. yes I made a complete list in the German Formentor-Forum.de, almost everything about it also works for the Leon  |
|
|
|
Post by seatmk4 on Apr 16, 2023 19:26:53 GMT
I mean the DRL without headlight and with fog light...This picture is my Wish.  |
|
C4NB!Z
Junior Member
Posts: 84
|
Post by C4NB!Z on Apr 16, 2023 20:10:23 GMT
So in addition to the normal DRL, that was the question.
Leuchte 12 & 13. Set Lichtfunktion to Tagfahrlicht
|
|
|
|
Post by seatmk4 on Apr 16, 2023 20:45:25 GMT
So in addition to the normal DRL, that was the question. Leuchte 12 & 13. Set Lichtfunktion to Tagfahrlicht Is it in your PDF list included? |
|
C4NB!Z
Junior Member
Posts: 84
|
Post by C4NB!Z on Apr 16, 2023 21:09:47 GMT
No because its not allowed in Germany. But its very simple 🤷🏼♂️ that coding Takes 2min
|
|
|
|
Post by seatmk4 on Apr 17, 2023 3:23:26 GMT
Sorry, if i forget to say, that this light Option is for CH/LH.
On my Golf 6, there was ist Like this picture.
This is not allowed in Germany?
|
|
C4NB!Z
Junior Member
Posts: 84
|
Post by C4NB!Z on Apr 17, 2023 8:36:34 GMT
For CH/LH its included in my pdf
for DRL not.
Yes, fog lights only allowed whether at night or during the day, driving with the fog lights on may only be done if visibility is significantly impaired by the following weather conditions:
- Fog
- snowfall
- heavy Rain
|
|
m550x
New Member
Posts: 1
|
Post by m550x on May 12, 2023 23:57:59 GMT
Hello, I am not able to find a clear answer to my question. If there someone who can help me ? I havec the 1.5 tsi cupra leon with drive assistance pack L and I want to know if it is possible to activate the travel assist ? Will it work normally ? Thanks for answers Yes you can activate Travel Assist with OBD 11, i have done it just you need to buy a Capacitive Steering Wheel and some Long Coding in OBD11! If you wana do it i can help i also have Steering wheel for sale if you need it. Cheers |
|
m550
New Member
Posts: 2
|
Post by m550 on May 29, 2023 13:30:37 GMT
Can someone share the procedure of coding rear view camera?
Thx
|
|
|
|
Post by woutboss on Jun 19, 2023 11:38:46 GMT
Hi Guys,
Just tried the one click app "DRL with CH/LH during the day". It took the credits, but it's not working on my Leon FR.
Is it possible to long code/adapt this asswell?
|
|
|
|
Post by emanuele25 on Jun 21, 2023 13:00:51 GMT
Hello, in my seat leon when I turn off the car and open the door the windows don't work, a few weeks ago I could use them for a few minutes... Has anyone had something similar happen?
|
|
giob
New Member
Posts: 2
|
Post by giob on Jun 26, 2023 10:54:30 GMT
Hi!
Is there a possibility to make the white daily lights turn orange and to set the as us-lights?
Would be nice if the was a 1 click for it aswel.
|
|
C4NB!Z
Junior Member
Posts: 84
|
Post by C4NB!Z on Jun 26, 2023 15:17:37 GMT
I couldn't get it to work, so I don't think it can.
|
|
|
|
Post by joaosantos on Jul 23, 2023 16:25:46 GMT
Hey guys!
So I have a leon 1.4 E-hybrid FR and I managed to activate the keyless advance feature. The car unlocks when I approach it but the function to lock it when I get away does no work. On the HMI, under car settings - central locking, there is two other options that are active, saying "unlock when approaching" and "locking when leaving". Although both are active, only the unlock functions works. When I approach the car, the key fob starts flashing and the car automatically unlocks.
I saw some videos on YouTube regarding the coding for that feature, although they were using a CUPRA FORMENTOR E-HYBRID.
Is there any thing that I have to do or this option on this car does not work?
Also, my car has travel assist from factory and although it is possible to enable the auto lane change is does not work. I activate the blinker, it says to watch the manouver but it does not change lane automatically. Is there any specific coding?
Thanks!!
|
|
|
|
Post by hollywood on Aug 1, 2023 19:26:21 GMT
Hi, first post! Is there any way when using flasher add the low beams together high beams as well? Like in Octavia 3 FL with Full led as is my leon as well - Full led.
Asking because they don't see me whn using the flash ! 😳
|
|
goldy
Junior Member
Posts: 59
|
Post by goldy on Aug 2, 2023 16:35:22 GMT
Does anyone know what the coding is for mapping the main infoteiment to the one where there is speed. To have an android car with google maps in front of it.
|
|
|
|
Post by rosicky on Aug 3, 2023 11:01:04 GMT
Thanks to this forum I managed to get Cupra View, G-Force meter, Power&Torque display.
I have the Assist Package XL but with the small display and NO navigation system (I use full link instead).
I want to code the Traffic Sign recognition but could not find a solution until now. I have the XL assit pack and the small camera in the windscreen, so normally it should be possible or not?
Would be very nice if someone could help!
Thanks
|
|
C4NB!Z
Junior Member
Posts: 84
|
Post by C4NB!Z on Aug 4, 2023 12:20:41 GMT
Should be Swap/FEC
|
|
