|
Post by pita100 on Nov 28, 2020 8:50:29 GMT
Hi Guys, I'm new here and I'm really excited to be here . I'm planning to buy my second Cupra(2016 previous owner), 2018 with buckets, APR stage 2. The only mode I want to do is to swap the analog gauge to VC. I want to order from EBay those two parts: 5F0920790A - VC 5F0857053 1QB- Bezel So I need to know if I need to buy anything else beside those two parts and the most important question, is how I'm coding the VC to my car and keys. I'm a Network engineer, so I have some experience in coding also I have lots of experience with VCDS. Thanks in advance for any help.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Nov 28, 2020 9:14:08 GMT
Cant say i have seen it on this forum but have a chat here www.seatcupra.net/forums/threads/adding-digital-cockpit.462693/#post-4942181 or on here www.clubseatleon.net/viewforum.php?f=40 as they do a lot of Retrofit stuff. One word of warning i have seen for people who do it on there own a number of people (MQB Platform cars across the range) who have managed to do a factory reset on the breaks (Only working on the dash). So please make sure you have a full backup of your car and know how to recode the brake module if it wipes out the long coding. Good luck and please share if you find out how to do it.
|
|
|
Post by pita100 on Nov 28, 2020 11:29:40 GMT
Thank you very much. It's very wired, as it seems that I cannot find any guide how to do that. Is it possible to buy the guide?
Hoping to lead or direction...
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Nov 28, 2020 15:25:16 GMT
Sorry its not something i have spent much time looking at, from what i have seen yuu need ODIS access and most people on the sites I have looked at seem to pay to have the coding done. Give the guys on seatcupra.net a call I am sure they will be able to give you more detail.
|
|