|
Post by knorretje76 on Nov 25, 2020 15:58:29 GMT
How can I decode my foglights to LED, on my Ibiza FR 2018 (Netherlands) with full led headlight.
This is what I know. I go to module 9, then to leuchte12NL LB45 for left (and leuchte13NL RB5 for right) There I go to type_of_load_12 and than I look for "allgeneines LED not Open Diagnose" but there are 4 of these.... With one do I need, or anyone of the 4 is correct?
And I also heard that I have to put dimming_AB_12 on 127. Is this true? And do I change more?
At the moment type_of_load is "allgeneine_scheinwerfer" and light_function_A_12 is "nebellicht links" and light_function_B_12 is "abbiegelicht_links" the cornering light function is activated.
A little help is welcome.. thanks.
Btw, I don't know the exact specifications of the led. No not Ali stuff... But getting errors even though the are canbus proof...
|
|
pepe
New Member
Posts: 2
|
Post by pepe on Dec 27, 2020 10:55:25 GMT
Problem already solved?
|
|
kyl
New Member
Posts: 1
|
Post by kyl on Jan 6, 2021 3:14:07 GMT
I Have the same problem, did you find the solution?
|
|
|
Post by dv52 (Australia) on Jan 7, 2021 2:23:44 GMT
kyl : If no one else responds. try this: Leuchte12NL LB45-Lasttyp 12 and Leuchte13NL RB5-Lasttyp 13 change to 6 - LED Lichtmodul.
Then Leuchte4TFL LB4-Dimmwert AB 4 and Leuchte13NL RB5-Dimmwert AB 13 change to 127
Don
|
|
quickalex973
New Member
https://www.instagram.com/alextrem.design/
Posts: 27
|
Post by quickalex973 on Jan 13, 2021 2:51:29 GMT
Hello, What is your problem? I replaced the halogen bulbs with Chinese LEDs. And I got no error message
|
|
|
Post by knorretje76 on May 6, 2021 18:24:23 GMT
I am so sorry. I never responded to this. I lost track of my post.. never got an email when someone responded.
Yes I solved it. Just like I discribed in the topic start.
The funny thing was, when I cleared the error it took a while to come back. So it was a intermittent error. But solved it...
|
|
rupra
New Member
Posts: 42
|
Post by rupra on Aug 3, 2021 21:37:54 GMT
ı tried to change lamp type with adaption but when ı try it on the list there is no Led Lichtmodul option.
|
|
rupra
New Member
Posts: 42
|
Post by rupra on Aug 4, 2021 21:21:15 GMT
Update: I tried another option to fix the error, I used the "LedKleinleistungohneOpenLoadDiagnose" option. Then I changed the value with this, I didn't get any error anymore after that. I'm happy now with my new bulbs
|
|