gmon
New Member
Posts: 2
|
Post by gmon on Nov 20, 2020 2:55:15 GMT
hello I have made many modifications to various modules. And I have not written them down. Big mistake. Now the high beams don't work, if I don't start the car in low ambient light. I think they are some Central configution, Multifunction or A5 module. Some would have an original backup of these modules. Thanks a lot. I cross my fingers.
|
|
|
Post by johnd211 on Nov 21, 2020 9:19:07 GMT
Just check your history on OBDELEVEN. Any changes made are there You should always make a back up
|
|
gmon
New Member
Posts: 2
|
Post by gmon on Nov 21, 2020 19:07:48 GMT
Thank you so much for your advice. From now on I will always make a backup. I learned the lesson. I have already tried the history. There are modifications that are not registered. Unfortunately I have done too many. My simplest solution is to review the configuration that I have comparing with another. Bye.
|
|
|
Post by johnd211 on Nov 23, 2020 14:14:39 GMT
If you go into each individual module you will see history. Date and time and coding changes made. You will find it. What error are you getting?
|
|