Disable Backup Camera and Other Questions...

new

« Prev
1
Next »

stun4000
New Member

Posts: 17

Disable Backup Camera and Other Questions... Nov 12, 2020 21:50:17 GMT

Quote

Post by stun4000 on Nov 12, 2020 21:50:17 GMT

Hey everyone. Three things Im working on figuring out.

1. How do you disable the backup camera feature. I found how to turn of the video portion in multimedia/longcoding/rearview low, but I can seem to find what controls the badge from opening up when I throw it in reverse

2. I have already set u auto-lock as well as turning on door lock/unlock with engine running. I think they are a fantastic pair of mods. It is possible to set it up where it won't auto lock if the car is running?

3. Small one...Id like to turn the staging feature in the dashboard off. I don't really need the car to tell me which gear I'm in being that its a manual and I hope I should know that information. I found staging yes/no in the dashboard coding, but it doesn't seem to do anything...

Also, anyone know what the Rough Road Setting in the brakes module actually does?

Any info for the above would be appreciated. As I am learning Ill try to spread the information as well...

Last Edit: Nov 13, 2020 1:04:36 GMT by stun4000

2018gti
Full Member

2018 GTI Autobahn 6-speed

Posts: 111

Disable Backup Camera and Other Questions... Nov 13, 2020 19:36:03 GMT

Quote

Post by 2018gti on Nov 13, 2020 19:36:03 GMT

I think I know the answer to your first question but not the others unfortunately. I'd love to know a solution to your #3 question.

So the reverse camera is tied by a wire to the right reverse light - whenever the light comes on, it knows to pop itself out. You'd probably have to either disconnect/cut this wire that goes to the reverse camera, or code out that reverse light so it doesn't light up anymore. This is for the low line camera, not the fancy 360 one.

cjn
New Member

Posts: 23

Disable Backup Camera and Other Questions... Nov 14, 2020 8:17:46 GMT

Quote

Post by cjn on Nov 14, 2020 8:17:46 GMT

Nov 12, 2020 21:50:17 GMT stun4000 said:

Hey everyone. Three things Im working on figuring out.

3. Small one...Id like to turn the staging feature in the dashboard off. I don't really need the car to tell me which gear I'm in being that its a manual and I hope I should know that information. I found staging yes/no in the dashboard coding, but it doesn't seem to do anything...

I don't think you're asking the right question here. "Staging" refers to the initial sweep of the instrument needles when you switch on. Nothing to do with gear info AFAIK.

stun4000
New Member

Posts: 17

Disable Backup Camera and Other Questions... Nov 14, 2020 14:34:02 GMT

Quote

Post by stun4000 on Nov 14, 2020 14:34:02 GMT

hmm ok, good chance Im mistaken. So what would it be called then?

and I will check out the back up camera wire today. I just junked my 2003 golf, which I was much more comfortable just sniping wires on...I feel like there has to be a coding ability to shut it off, but so far I can't find one. so maybe its a hardwire mod.

vwjap God Posts: 2,809	Disable Backup Camera and Other Questions... Nov 14, 2020 20:13:13 GMT Quote Select Post Deselect Post Link to Post Back to Top Post by vwjap on Nov 14, 2020 20:13:13 GMT Is it a highline or lowline?
	2017 Golf mk7 facelift gt-tdi 150 lots of toys 1958 T2 import from South Africa

dv52 (Australia) Moderator Posts: 6,062	Disable Backup Camera and Other Questions... Nov 14, 2020 21:59:34 GMT Quote Select Post Deselect Post Link to Post Back to Top Post by dv52 (Australia) on Nov 14, 2020 21:59:34 GMT try this: Go to the hex5F module Go to Coding Scroll-down until you find the highlighted entry below change setting to not activated Don
	Last Edit: Nov 14, 2020 22:01:29 GMT by dv52 (Australia) Please don't ask questions about car coding/repair via the forum "Message" function. The better place for such dialogue is in the forum proper. That way, the wider expertise of the entire forum community can be applied to solve your problem - thank you

stun4000 New Member Posts: 17	Disable Backup Camera and Other Questions... Nov 14, 2020 23:53:30 GMT Quote Select Post Deselect Post Link to Post Back to Top Post by stun4000 on Nov 14, 2020 23:53:30 GMT I did that, and it does turn off the video portion, bit I can still hear the badge opening up and closing...
	Last Edit: Nov 14, 2020 23:53:43 GMT by stun4000

dv52 (Australia)
Moderator

Posts: 6,062

Disable Backup Camera and Other Questions... Nov 15, 2020 21:09:54 GMT 2018gti likes this

Quote

Post by dv52 (Australia) on Nov 15, 2020 21:09:54 GMT

stun4000 : Hi again!!

Yes, my suggestion wasn't intended to stop the badge from opening/closing. You asked for a software solution and my suggestion was just that!

If you want to stop the badge from opening, then you will have to follow 2018gti suggestion - which is of course a hardware solution!

The low-line RVC is a dumb device (meaning that it's NOT connected to the CAN bus) - so you can't stop the badge from opening, via OBD11, alas

Don

Last Edit: Nov 15, 2020 21:12:17 GMT by dv52 (Australia)

Please don't ask questions about car coding/repair via the forum "Message" function. The better place for such dialogue is in the forum proper. That way, the wider expertise of the entire forum community can be applied to solve your problem - thank you

Shoutbox

Please don't use the shoutbox for complex questions! For those questions please create a thread in the right subforum.

georgegianna: Recover Your Lost Coins with Paradox Recovery Wizard

I just wanted to express my heartfelt gratitude for your incredible help in recovering my lost funds. Your expertise and dedication have truly made a difference, and I’m so thankful for the support you’ Nov 15, 2024 19:31:50 GMT

derpandabear: Hi everyone, it's been two weeks since I've posted my question. I would greatly appreciate it if anyone can respond to my thread: forum.obdeleven.com/thread/28144/summertime-setting-mk8-golf-gti. Thanks and Best Regards! Nov 16, 2024 19:49:09 GMT

bmwg30lci: sveiki,noreciau gauti daugiau informacijos apie jusu produkcijos paskirti.ar imanoma pakeisti salone migtuku spalvas?pvz; pas bmw g30 lci tamsoje sviecia oranzine spalva o diena balta.as noreciau,kad visuomet butu tik baltas mygtuku pasvietimas. Nov 18, 2024 8:02:36 GMT

whataboutthis: @bmwg201ci jums reikia patikrinti vieno paspaudimo programas, skirtas jūsų varikliui, jei to, ko norite, ten nėra, pateikite užklausą BMW oca temoje. Nov 18, 2024 9:13:28 GMT

dado: GOLF 6 MATCH - include scandinavian DRL lights? does anyone know Nov 18, 2024 10:02:35 GMT

med44: brkica SIL VOUS PLAIT J'AI INSTALER UNE CAMERA SUR UNE GOLF 8 ;ET Jai besoin du fichier 5WA980556B. Nov 19, 2024 0:35:46 GMT

lazar: How do i change app country? bmw features not available Nov 19, 2024 19:18:39 GMT

Deleted: BIuS Nov 20, 2024 1:55:57 GMT

kp55: Hi, Nov 20, 2024 15:29:05 GMT

kp55: I have VW High Beam Assist installed, however in the module under Long Coding some settings are obvious but some are not. Mine was set to left hand drive which I've changed but can anyone who drives a right hand drive please help with settings? Nov 20, 2024 15:36:06 GMT

le4dsoldier: hı Nov 20, 2024 18:39:26 GMT

le4dsoldier: ı need some help, if ı'll buy a normal obdeleven. may ı use longcoding and can ı remove sfd lock Nov 20, 2024 18:40:54 GMT

fliew: Hi All, can anyone help me to reset my 2014 Audi S3 A/C to factory setting with OBD11, thanks. Nov 21, 2024 0:38:03 GMT

t5golf: Hello, I saw in the past a tread about programming/ coding Golf VIII( and other VAG types), for example speed regulation. I saved the list/ tread it on PC but do not find it anymore. Can somone share it? Thx . Nov 21, 2024 7:09:30 GMT

bumble: Does "Confirmation of installation change" in 5F need a Pro or Ultimate license? Nov 21, 2024 10:09:51 GMT

whataboutthis: le4dsoldier if you have a pre 2024 VAG motor that is supported and you have the Pro or Ultimate license you can code Adaptions and long Coding but after 2024 SFD2 STOPS YOU. SFD Can be unlocked but basic plan only allows you to use OCA Nov 21, 2024 16:52:53 GMT

whataboutthis: fliew you need to share more info, car year have you coded in obd11 or vcds etc there is no magic button to revert to factory setting you have to undo all your changes manually in Adaptions and Long Coding you can copy/paste if you have backup Nov 21, 2024 16:54:18 GMT

yncers: кто ставил дорожные знаки на туарег CR7 Nov 23, 2024 18:26:18 GMT

yncers: OBDelevan Nov 23, 2024 18:27:02 GMT

yncers: OBDelevan Nov 23, 2024 18:27:20 GMT