snug
New Member
Posts: 2
|
Post by snug on Nov 12, 2020 15:06:54 GMT
Hi,
I tried to code the feature lane assist into my crafter.
What I did:
STG 17
Byte 4 Bit 6 set Byte 11 Bit 1 set
STG A5
Byte 16 Bit 7 set
access code 20103
APK "Einschaltzustand Spurhalteassistent" on (Menü)
APK "Warnungsintensität Spurhalteassi" to „Menü“ APK "Personalisierung_BAP" to "nicht aktiviert"
STG 5F
APK „Car_Function_List_BAP_Gen2-LDW_HCA_0x19“ to activated APK „Car_Function_Adaptations_Gen2-menu_display_Lane_Departure_Warning“ to activated APK „Car_Function_Adaptations_Gen2_menu_display_Lane_Departure_Warning_over_threshold_high” to activated
STG 44
Zugriffsberechtigung 19249
Byte 0 Bit 4 set
STG 76 Byte 3 Bit 5 set
However, I still get two errors: STG A5: U101400 - Steuergerät falsch codiert (coding wrong) and STG 13 (camera): U112300 - Datenbus empfangener Fehlerwert statisch (data bus error value)
Does anyone has a hint what is missing?
Thanks!
|
|
snug
New Member
Posts: 2
|
Post by snug on Jan 31, 2021 14:04:24 GMT
Update: Lane assist is now working. The mentioned steps are correct, the last one (STG 76 Byte 3 Bit 5) must be left out.
|
|
|
Post by holmvall on Feb 13, 2021 19:30:01 GMT
What I understand a camera mounted at the top of the windshield is needed? Right?
I dont think I have one so no need for me to try code for lane assist.
Cheers
|
|
|
Post by frateken on Mar 27, 2021 18:52:43 GMT
I actived lane assist by Obdeleven App and it is always active. I enable the voices in the menu but are grey color and i can't use it. Anyone know how can i enable that voices?
|
|
|
Post by dominich on Dec 10, 2021 9:35:24 GMT
I am new to all this, so wasn't aware until I read your posts that you could do more than what the app offers under Apps.
I see there is an App for the Golf R that allows you to modify the lane assist to bring it on much earlier, effectively making it like an auto pilot.
Do you think that is possible for the Crafter?
|
|