|
Post by homersimpson on Nov 5, 2020 17:08:50 GMT
Hi, guys. I have A6 45 TFSI quattro premium 2020, equipped with matrix LED headlight(non HD) Using apps in OBDeleven, I turned on the Travel Mode Menu. Menu showed up on MMI menu, but I could NOT notice any change So I turned off using OBDeleven apps. After turning off, I see the error message on startup. maybe in english "Headlight Range Control System; now restricted !" All headlight function seems to be normal. There is no scan error. Do you have any idea ?
|
|
denbal
Junior Member
Posts: 61
|
Post by denbal on Nov 6, 2020 10:42:19 GMT
Hey,
Travel mode is useless, since the cars read their data from GPS and changes headlights automatically when driving in countries with oppositive driving positions.
For the problem you are having now, you need to set your car on level ground. And reset de basic settings of the headlight.
STG09- Central electronics Basic settings Basic headlamp setting Activate
Then Acknowledge basic setting Activate
|
|
|
Post by homersimpson on Nov 8, 2020 19:38:45 GMT
Thanks denbal. I solved problem.
|
|
|
Post by stretchinpa on Nov 10, 2020 3:25:24 GMT
How did you solve the problem?
Mine occasionally shows the same type of warning but goes away quickly.
|
|
|
Post by homersimpson on Nov 10, 2020 17:37:26 GMT
As denbal mentioned, it is headlamp basic setting and acknowledge basic setting Set the car on level ground, open the hood and IGN on Stay outside of the car, keep the key inside of the car. Go to Central electrics -> basic setting -> basic headlamp setting -> activate for ~30s, then stop Go to Acknowledge basic setting -> activate for ~30s, then stop Until now, there is no error message and scan error.
Good luck !
|
|