|
|
Post by marcib1709 on Oct 26, 2020 9:06:09 GMT
Hello,
I deactivated my speedometer lighting by coding the footwell lighting, unfortunately I cannot reactivate the speedometer lighting. Does anyone have any idea what I can do so that I can light up my speedometer and radio again in the dark?
Thank you
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Oct 26, 2020 9:36:59 GMT
have you double checked that you have reversed all the changes you made back to how they were to start with.
Also have you run a scan to see if any errors are showing
lassen Sie überprüfen, ob Sie alle von Ihnen vorgenommenen Änderungen wieder rückgängig gemacht haben, so wie sie ursprünglich waren.
Haben Sie auch einen Scan durchgeführt, um zu sehen, ob irgendwelche Fehler angezeigt werden
|
|
|
|
Post by marcib1709 on Oct 26, 2020 10:02:28 GMT
Hello,
Yes I deactivated the footwell lighting again because it showed me an error / short circuit to ground. I think this is because there is no footwell light installed.
I can't say if I have undone all programming, I have tried several things to program.
Greeting Marcel
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Oct 26, 2020 10:36:16 GMT
I would suggest going through your history and just make sure you have undone the correct items and see if you have made any changes to Control unit 17.
|
|
|
|
Post by marcib1709 on Oct 26, 2020 11:30:59 GMT
Is it possible to restore an old coding by copying? I can read the entire block from the history and would then like to copy it.
Greetings Marcel
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Oct 26, 2020 12:23:25 GMT
|
|
|
|
Post by marcib1709 on Oct 26, 2020 13:48:32 GMT
Thanks, I'll try it out later!
Greetings Marcel
|
|
|
|
Post by marcib1709 on Oct 26, 2020 15:17:27 GMT
Many thanks for the help!
The copying worked!
Greetings Marcel
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Oct 26, 2020 15:33:43 GMT
You're welcome  |
|
