|
|
Post by davince10 on Oct 23, 2020 11:40:24 GMT
Hi all i have VW PASSAT B8
I activated mirror dip in Reverse everything work fine the mirror dips properly, but after that the mirror never goes up to the first position.
How can i solve this?
Thanks in advance.
|
|
|
|
Post by dv52 (Australia) on Oct 23, 2020 21:50:19 GMT
^^^ davince10, This is a classic symptom of a passenger side mirror without a memory module installed (the memory module records the starting location so the mirror knows the correct return position). You can confirm my hypothesis by conducting the following test with OBD11:  To fix the problem, you need to install a memory module Don |
|
|
|
Post by davince10 on Oct 25, 2020 19:47:57 GMT
Thanks Don
That was also my way of thinking, that could be the lack of position memory
|
|
|
|
Post by vlaovic21 on Oct 26, 2020 16:31:34 GMT
davince10" How can I install memory module? Where can I find that? Tnx
|
|
|
|
Post by 10adika20 on May 27, 2021 13:14:05 GMT
I also wish to know this? Or is there any codeable solution? |
|
b8er
New Member
Posts: 17
|
Post by b8er on May 30, 2021 8:49:39 GMT
IT only dips in reverse when also the left turn wheel Points to the "r". (next to the Window Switches)
|
|
|
|
Post by papiko8 on Dec 5, 2021 23:43:08 GMT
Yup works for me the same, is there a way to change it for work when I put reverse only? So I wont have to switch mirror joystick to the R (its kinda annoying and I sometimes even forget about it)
|
|
