|
|
Post by chevie on Dec 15, 2016 10:23:34 GMT
Hi there, how would it be if we collect the codes füor the new Tiguan-2 (MQB) here in the Special thread?
I just got my ODB11 Interface and my pro code. I was able to manage the Display of the clima Ventilation (STG 08) even in auto mode and it works fine.
But, there is no entry for Comming Home / Leaving Home Lights (STG 09) in my ODB11 Display. How it it named?
Also, most of my setings are not recognized in my odb11 info Display. How do I re-read them to make them to be found?
|
|
|
|
Post by dv52 (Australia) on Dec 30, 2016 2:50:46 GMT
Hi there, how would it be if we collect the codes füor the new Tiguan-2 (MQB) here in the Special thread?
I just got my ODB11 Interface and my pro code. I was able to manage the Display of the clima Ventilation (STG 08) even in auto mode and it works fine.
But, there is no entry for Comming Home / Leaving Home Lights (STG 09) in my ODB11 Display. How it it named?
Also, most of my setings are not recognized in my odb11 info Display. How do I re-read them to make them to be found?
chevie: Hi - I'm not sure about your MQB Tiggy, but on my MQB Golf mk7, CH function is embedded in what database guys call a "parent channel" (i.e. the CH function is not accessed directly, but rather it is a "Child" function of the "Parent" grouping of adaptation channels.
So, when you select Adaptations on the Central electrics control module (@ address hex 09), search for Comfort illumination and you might get the group of channels similar to those below - Coming Home is the group that I have enclosed in a yellow box:
Don
IF your Tiggy does have these channels, then here's a few comments that might be useful
- Coming Home Verbaustatus this channel determines whether you have to manually engage CH (with the high-beam lever), or whether the function is automatically enabled
- Menuesteuerung Coming Home Werkseinstellung this channel places the CH function on the menu screen
- Menueeinstellung Cominghome this setting determines the time delay before the CH lights switch-off (this can be set in the menu also)
- Coming-home Einschaltereignis this determines which switch-on mechanism will trigger CH - if you choose "driver door", then CH will be energized when you open the driver's door (not surprisingly)
- Coming Home Leuchten this setting determines which lights will be used - choice is "low beam" or "fog" (or "not active")
Switch-on procedure for CH
- Make sure that CH is enabled on the MENU
- Switch-off the ignition
- Pull-forward the high-beam stalk momentarily (for about 1 second)
- If you set-up the trigger channel as "driver door", then the lights that you selected will come-on when the driver's door is opened
- The time-delay (i.e. 10 seconds in my screenshot) starts to count-down when the last door is closed on the car (inc. the hatch) 
Don
|
|
|
|
Post by Mellones on Dec 31, 2016 7:52:49 GMT
Coming'home auto
1. Stg9
2. Aussenlicht uebergreifend
3. Coming home verbaustatus "auto"
4. Normal 'manual'
;-)
|
|
