|
|
Post by a3mcn8v on Oct 18, 2020 22:02:27 GMT
Hi, i’ve just installed the rain/light sensor and light switch with “auto” mode, because previously i had only manual lights and wipers.
Someone knows how to enable rain sensor and automatic lights (also C/L home)?
Car info:
A3(8V) e-tron
Year: 2015
Xenon front lights
|
|
|
|
Post by dv52 (Australia) on Oct 18, 2020 22:35:01 GMT
a3mcn8v : Hi. First, my apology for the following: 1. for using screenshots from previous OBD11 software, but the information is the same for the current SW. 2. Also, please ignore the boxed entries (the screenshots were originally used for another purpose). 3. Finally, the yellow entries on the RHS of the screenshots are my additions - they don't appear on the OBD11 screens Go to the Central electrics module - then choose Coding. If you get the Byte/Bit screen (with tick boxes) - press the 0/1 symbol (to the left of the circled "?") on the upper right-side of the screen
To register the new Rain/Light sensor - scroll down to Regen_Lichtsensor and change to setting shown  To register the new rotary light switch - scroll to the LDS entries and change to the values of LDS_mit_AFL to Yes (the entry below the yellow box)
Don
|
|
|
|
Post by a3mcn8v on Oct 18, 2020 23:20:16 GMT
Hi Don,
Thanks a lot for your time! I’ll try to apply all your instructions, and than i’ll let you know.
Take care!
Marc
|
|
|
|
Post by a3mcn8v on Oct 24, 2020 21:30:49 GMT
Update: It’s all working, thanks for your help!  |
|
