|
|
Post by blackpearl on Oct 18, 2020 12:07:55 GMT
I am using the R cockpit theme yellow (gold) But I wishes to have the blue color on the dots and meter lines. I can change the themes with my obdeleven pro and when doing that the colors automatically changes ex GTI gets blue but then there are no dots 🙄 The virtual cockpit color app is not supported it stands, but the color changes with theme changes app, why aint it possible to manually change color red blue yellow and keep the dots then? 🙃  |
|
|
|
Post by vwjap on Oct 18, 2020 13:00:19 GMT
You can, with the 10 colour mod, or 30
|
|
|
|
Post by blackpearl on Oct 18, 2020 13:31:53 GMT
Do you have any link or direct obdeleven pro entry to do it? 😊
|
|
|
|
Post by vwjap on Oct 18, 2020 14:38:51 GMT
Think I’ve wrote it 4-5 times in codings and adaptions mate,
|
|
|
|
Post by vwjap on Oct 18, 2020 14:43:18 GMT
What I did
Central electronics
Adaptions
int light. 2nd generation
Instrumententafelbeleuchtung mehrfarbig - active
Interior light, light configuration
Ambientemenue mit alle zonen - active
I then reset the mmi by pressing and holding the on/off button for 10 seconds then went into car/settings then checked the "background lighting" button was in there, pressed it and checked it went on to a picture of the interior of the car, then
Central electronics
Adaptions
Interior light, light configuration
ambient_farbliste_Hmi - active
Then back to central electronics adaptions
Ambientelicht Farbliste
Rotwert Farbe 1:217
Gruenwert Farbe 1:221
Blauwert Farbe 1:235
Rotwert Farbe 2:169
Gruenwert Farbe 2:169
Blauwert Farbe 2:169
Rotwert Farbe 3:253
Gruenwert Farbe 3:108
Blauwert Farbe 3:55
Rotwert Farbe 4:242
Gruenwert Farbe 4:0
Blauwert Farbe 4:40
Rotwert Farbe 5:254
Gruenwert Farbe 5:88
Blauwert Farbe 5:240
Rotwert Farbe 6:124
Gruenwert Farbe 6:63
Blauwert Farbe 6:190
Rotwert Farbe 7:0
Gruenwert Farbe 7:102
Blauwert Farbe 7:255
Rotwert Farbe 8:0
Gruenwert Farbe 8:204
Blauwert Farbe 8:255
Rotwert Farbe 9:0
Gruenwert Farbe 9:204
Blauwert Farbe 9:0
Rotwert Farbe 10:136
Gruenwert Farbe 10:255
Blauwert Farbe 10:57
The I reset the mmi again
Then went into car/settings/background lighting and at the bottom of the screen there's a brightness slider and next to the brightness slider there's a button with 3 interlaced colour circles in it, pressed that and you then get a colour slider, slide that to whatever colour and you'll see the colours change on the mmi and AID screens
|
|
|
|
Post by blackpearl on Oct 18, 2020 15:19:09 GMT
I will try it as soon the wife gets home with the car from work  but there is no direct adaption coding only to change the AID with the dots to blue from the obdeleven? |
|
|
|
Post by vwjap on Oct 18, 2020 16:38:46 GMT
Don’t think so, you could try changing the car variant in dash then back again, as there’s a couple of red gte clocks and others are blue
|
|
|
|
Post by blackpearl on Oct 30, 2020 18:38:29 GMT
Worked like a charm 😊 thanks vwjap 👍🏻  |
|
|
|
Post by vwjap on Oct 30, 2020 19:39:10 GMT
Which one worked? Colour select or switching variants?
|
|
|
|
Post by blackpearl on Oct 30, 2020 19:49:59 GMT
Colour select only 👍🏻
|
|
|
|
Post by vwjap on Oct 30, 2020 20:04:06 GMT
Ok thanks, have you done independent brightness too?
|
|
|
|
Post by vwjap on Oct 30, 2020 20:15:03 GMT
Ok to get the footwell and door brightness sliders you need to change these 2 to from 0 to 8x1 (11111111, although I have tried any other 8 figure binary and it seems to work), IGNORE THE PATTERN OF 0-255 that Obdeleven puts up
Central electronics
Interior lighting, parameter:
p_ambientelicht_verbauinformation_HMI:
11111111 (default is 0, and this one is for footwell)
p_ambientelicht_verbauinformation_HMI_2:
11111111 (default is 0, and this one is for the door)
I’m sure HMI_3 & 4 will put the settings cog on for other lights like maybe Center console if you had them in your car
Now you will have the cogs on the brightness screen, but the glow will be WHITE
Now if you want the glow on the screen to be the same colour as your display
Interior lighting, parameter:
p_ambienteumfang_mehrfarbig_HMI:
100 (default is 0, footwell)
p_ambienteumfang_mehrfarbig_HMI_2:
100 (default is 0, door)
There you go independent footwell and door lighting with colour change
|
|
|
|
Post by karnagegti on Aug 24, 2021 13:10:58 GMT
Hey VWJAP,
So i followed the steps and everything went good but.. still on the digital dash remains red and wont change colour when i cycle through the other colours.
Would you know what i missed or done wrong??
Cheers.
|
|
|
|
Post by egkefalo on Jul 12, 2024 9:01:16 GMT
Hello, I know it's an old topic.
I did ambiance coding for the Passat B8 vehicle, but the colors did not arrive. Can you help me?
There is only blue color in the menu
|
|
|
|
Post by vwjap on Jul 18, 2024 21:47:35 GMT
Did you copy all the colours in? As in you can’t have all RGB as 0
|
|
|
|
Post by vwjap on Jul 18, 2024 21:48:42 GMT
Hey VWJAP, So i followed the steps and everything went good but.. still on the digital dash remains red and wont change colour when i cycle through the other colours. Would you know what i missed or done wrong?? Cheers. int light. 2nd generation Instrumententafelbeleuchtung mehrfarbig - active |
|
