tomas
New Member
Posts: 33
|
Post by tomas on Oct 15, 2020 18:00:39 GMT
Hello.
How to code control of burnt light bulbs? I mean all bulbs in the car.
i wish wonderful day
|
|
|
|
Post by peter036 on Oct 21, 2020 11:03:15 GMT
tomas, you probably found out already, in çentral electrics (module 09) go to long coding and read all lines that you can see when using the blue trianle in the bottom right corner. You will eventually find entries for lampdiagnostics (per lamp-use, so keep checking next page while at it) which you can switch to active or not active.
|
|
tomas
New Member
Posts: 33
|
Post by tomas on Oct 21, 2020 17:16:52 GMT
Thank U for answer.
I will try to send you a screenshot to show my problem.
Have a wonderful day
|
|
tomas
New Member
Posts: 33
|
Post by tomas on Nov 3, 2020 19:47:29 GMT
|
|
|
|
Post by peter036 on Nov 9, 2020 15:04:56 GMT
tomas, those are exactly the screens that I ment, so you found them! You can switch them to what you want..........and confirm the change (if any). That should work.
|
|
tomas
New Member
Posts: 33
|
Post by tomas on Nov 10, 2020 18:30:06 GMT
|
|
