Cornering lights Mk7.5

2dvs New Member Posts: 3	Cornering lights Mk7.5 Oct 15, 2020 0:01:41 GMT Quote Select Post Deselect Post Link to Post Back to Top Post by 2dvs on Oct 15, 2020 0:01:41 GMT Hi, I'm new to Obdelelven when I used it for the first time, I ended up with the Dynamic Cornering Light error, well I fixed that some how, but now my cornering lights don't work, I have the LED headlights, any idea how to turn them back on.

dv52 (Australia)
Moderator

Posts: 6,062

Cornering lights Mk7.5 Oct 15, 2020 1:42:12 GMT

Quote

Post by dv52 (Australia) on Oct 15, 2020 1:42:12 GMT

2dvs : Hi. Yes, I understand that you are a new-bee to OBD11, but here's the problem that the forum faces in responding with suggestions that are at least half reasonable;

We know that your car has LED headlights and that it has a "cornering light" related problem. We can assume that the car is a mk7.5 but we don't know what model, or even the country of sale. You imply that the error might be due to a change that you made, but we don't know what change you made (look in the HISTORY option if you aren't sure).

looking forward to reading another post with further, more specific information

Don

Last Edit: Oct 15, 2020 1:43:38 GMT by dv52 (Australia)

Please don't ask questions about car coding/repair via the forum "Message" function. The better place for such dialogue is in the forum proper. That way, the wider expertise of the entire forum community can be applied to solve your problem - thank you

2dvs
New Member

Posts: 3

Cornering lights Mk7.5 Oct 15, 2020 9:47:24 GMT dv52 (Australia) likes this

Quote

Post by 2dvs on Oct 15, 2020 9:47:24 GMT

Thanks for the reply and sorry for my vague request, my car is a 2018 Golf Highline Mk7.5 Rline, Australian Model, I think I've sorted it out. as they now seem to be working after i did a basic settings reset and reset all adaptions

helletcr
New Member

Posts: 4

Cornering lights Mk7.5 Oct 18, 2020 13:45:45 GMT via mobile

Quote

Post by helletcr on Oct 18, 2020 13:45:45 GMT

Hello to everyone.
I’m from Belgium, and I have the OBD11 Pro version for IOS.

I have a 2019 Golf 7.5 GTI TCR and I did some changes with my IPhone.
Everything went well, but after I did a long coding change for the Dynamic Cornering lights, my virtual cockpit gives a fault when I turn on the ignition.

“Malfunction: Dynamic Cornering lights”

When I look in my history, it said that it was in Module 17 Dashboard
Long coding
Diagnose session: VW diagnosemodus
Coding: Refuel volume
Old value: No
New value: Yes

Could someone give me some advice please?
Thanks in advance

dv52 (Australia)
Moderator

Posts: 6,062

Cornering lights Mk7.5 Oct 18, 2020 22:11:05 GMT

Quote

Post by dv52 (Australia) on Oct 18, 2020 22:11:05 GMT

helletcr:Hi.

hmm......... as you will have observed yourself - the record that you posted from the history facility is NOT related to the change that you said that you made (i.e. "I did a long coding change for the Dynamic Cornering lights").

Please post up the relevant change information

Don

Please don't ask questions about car coding/repair via the forum "Message" function. The better place for such dialogue is in the forum proper. That way, the wider expertise of the entire forum community can be applied to solve your problem - thank you

helletcr
New Member

Posts: 4

Cornering lights Mk7.5 Oct 19, 2020 9:53:34 GMT via mobile

Quote

Post by helletcr on Oct 19, 2020 9:53:34 GMT

When I scan the TCR for errors, it gives me two errors.
1. Gateway: Databus: Error code: U112400, permanent.
2. Multifunction Module: Headlight: no basic adjustment
Error code: C107E54, permanent.

And when I turn on the ignition, it still say: Malfunction: Dynamic Cornering lights.

Last Edit: Oct 19, 2020 10:03:39 GMT by Thirsty

dv52 (Australia)
Moderator

Posts: 6,062

Cornering lights Mk7.5 Oct 19, 2020 23:18:19 GMT

Quote

Post by dv52 (Australia) on Oct 19, 2020 23:18:19 GMT

helletcr: Hmm... thanks for the additional information, but this is not the data that I requested.

Let's try this another way - Please post-up a copy of your history report

To do this, select the "export" symbol on the history screen and send yourself an email (then cut-and-paste the data), or include a picture here.

Don

Last Edit: Oct 19, 2020 23:19:06 GMT by dv52 (Australia)

Please don't ask questions about car coding/repair via the forum "Message" function. The better place for such dialogue is in the forum proper. That way, the wider expertise of the entire forum community can be applied to solve your problem - thank you

helletcr
New Member

Posts: 4

Cornering lights Mk7.5 Oct 20, 2020 7:23:23 GMT via mobile

Quote

Post by helletcr on Oct 20, 2020 7:23:23 GMT

Sorry that it’s in Dutch.
Don’t know if this will go for you?
But thanks anyway 🙏

OBDeleven voertuig historie log
Datum: 2020-10-20 09:09:05

VIN: WVWZZZAUZKW114111
Auto:
Jaar: 2019
Body type: D5 Hatchback
Motor: DNUC 213 kW (290 hp) 2.0l
Kilometerstand: 23476 km

---------------------------------------------------------------
Full scan
Modules: 21
Fault count: 2
Modules:
01 Engine
Systeem omschrijving: 2.0l R4 TFSI
Software nummer: 8V0906259R
Software versie: 0002
Hardware nummer: 06K907425J
Hardware versie: H13

Fouten:
Geen fout codes gevonden

09 Central Electrics
Systeem omschrijving: BCM MQBAB M+
Software nummer: 5Q0937084DC
Software versie: 0273
Hardware nummer: 5Q0937084CF
Hardware versie: H38

Fouten:
Geen fout codes gevonden

03 Brakes
Systeem omschrijving: ESC
Software nummer: 5Q0614517EF
Software versie: 0107
Hardware nummer: 5Q0614517BP
Hardware versie: H35

Fouten:
Geen fout codes gevonden

08 Air Conditioning
Systeem omschrijving: Climatronic
Software nummer: 5G0907044CF
Software versie: 1801
Hardware nummer: 5G0907044CF
Hardware versie: H04

Fouten:
Geen fout codes gevonden

02 Transmission
Systeem omschrijving: GSG DQ381
Software nummer: 0GC300020L
Software versie: 2401
Hardware nummer: 0GC927711H
Hardware versie: H06

Fouten:
Geen fout codes gevonden

14 Wheel Dampening
Systeem omschrijving: DAEMPFUNGS-SG
Software nummer: 5Q0907376B
Software versie: 0121
Hardware nummer: 5Q0907376A
Hardware versie: H17

Fouten:
Geen fout codes gevonden

13 Adaptive Cruise Control
Systeem omschrijving: ACC BOSCH MQB
Software nummer: 5Q0907572P
Software versie: 0682
Hardware nummer: 3QF907572A
Hardware versie: H11

Fouten:
Geen fout codes gevonden

19 Gateway
Systeem omschrijving: GW MQB High
Software nummer: 3Q0907530AA
Software versie: 4366
Hardware nummer: 3Q0907530C
Hardware versie: 442

Fouten:
U112400 - Databus
Opties herkend
Permanent

17 Dashboard
Systeem omschrijving: KOMBI
Software nummer: 5G1920791B
Software versie: 4191
Hardware nummer: 5G1920791B
Hardware versie: 403

Fouten:
Geen fout codes gevonden

15 Airbag
Systeem omschrijving: AirbagVW21
Software nummer: 5Q0959655BS
Software versie: 0403
Hardware nummer: 5Q0959655BS
Hardware versie: 007

Fouten:
Geen fout codes gevonden

29 Light Control Left
Systeem omschrijving: LCM_MLBevo
Software nummer: 8V0907399D
Software versie: 0014
Hardware nummer: 8V0907399D
Hardware versie: H08

Fouten:
Geen fout codes gevonden

32 Lock Electronics
Systeem omschrijving: Quersperre
Software nummer: 0CQ907554P
Software versie: 8043
Hardware nummer: 0CQ907554P
Hardware versie: H52

Fouten:
Geen fout codes gevonden

42 Driver Door
Systeem omschrijving: TSG FS
Software nummer: 5Q0959593F
Software versie: 0287
Hardware nummer: 5Q0959593F
Hardware versie: 001

Fouten:
Geen fout codes gevonden

39 Light Control Right
Systeem omschrijving: LCM_MLBevo
Software nummer: 8V0907399D
Software versie: 0014
Hardware nummer: 8V0907399D
Hardware versie: H08

Fouten:
Geen fout codes gevonden

44 Steering Assistance
Systeem omschrijving: EPS_MQB_ZFLS
Software nummer: 3Q0909144M
Software versie: 5082
Hardware nummer: 3Q0909144L
Hardware versie: 507

Fouten:
Geen fout codes gevonden

5F Multimedia
Systeem omschrijving: MU-H-ND-EU
Software nummer: 5NA035020D
Software versie: 1367
Hardware nummer: 5NA035020
Hardware versie: H55

Fouten:
Geen fout codes gevonden

47 Sound System
Systeem omschrijving: MIB2_lite_amp
Software nummer: 5Q0035456A
Software versie: 0200
Hardware nummer: 5Q0035456A
Hardware versie: H40

Fouten:
Geen fout codes gevonden

52 Passenger Door
Systeem omschrijving: TSG BFS
Software nummer: 5Q0959592F
Software versie: 0287
Hardware nummer: 5Q0959592F
Hardware versie: 001

Fouten:
Geen fout codes gevonden

4B Multifunction Module
Systeem omschrijving: FCM MQB Low
Software nummer: 3Q0907338C
Software versie: 0345
Hardware nummer: 3Q0907338C
Hardware versie: 002

Fouten:
C107E54 - Koplamp
Geen basisafstelling
Permanent

76 Parking Assistant
Systeem omschrijving: PDC 8 Kanal
Software nummer: 5QA919294C
Software versie: 0050
Hardware nummer: 5QA919294
Hardware versie: H07

Fouten:
Geen fout codes gevonden

75 Telematics
Systeem omschrijving: OCULowMQBLGE
Software nummer: 5NA035284C
Software versie: 0825
Hardware nummer: 5NA035284C
Hardware versie: H19

Fouten:
Geen fout codes gevonden

Last Edit: Oct 20, 2020 7:34:06 GMT by Thirsty

dv52 (Australia)
Moderator

Posts: 6,062

Cornering lights Mk7.5 Oct 21, 2020 20:43:32 GMT

Quote

Post by dv52 (Australia) on Oct 21, 2020 20:43:32 GMT

helletcr: So - it seems that somehow you have lost the headlight calibration in the Multifunction Module (@ address hex4B)

I suggest that you read this but that you apply the basic setting procedure to the hex4B module instead of the hex55 module in this case

Don

Last Edit: Oct 21, 2020 20:44:19 GMT by dv52 (Australia)

Please don't ask questions about car coding/repair via the forum "Message" function. The better place for such dialogue is in the forum proper. That way, the wider expertise of the entire forum community can be applied to solve your problem - thank you

helletcr
New Member

Posts: 4

Cornering lights Mk7.5 Oct 22, 2020 10:35:16 GMT via mobile

Quote

Post by helletcr on Oct 22, 2020 10:35:16 GMT

Thank you very much, the error message in the digital cockpit is gone, when I turn on the ignition.
When I do a scan, it gives only one error: Data bus: additional installations detected
Fault Error: U112400
Status: Static

But that doesn’t give an error message in the digital cockpit.
Do I leave it like this?

Greetings from Belgium 🇧🇪 🙏

Last Edit: Oct 22, 2020 10:48:27 GMT by Thirsty

dv52 (Australia) Moderator Posts: 6,062	Cornering lights Mk7.5 Oct 22, 2020 21:30:37 GMT Quote Select Post Deselect Post Link to Post Back to Top Post by dv52 (Australia) on Oct 22, 2020 21:30:37 GMT ^^^^@hellectr : It's entirely your decision!!! Don
	Please don't ask questions about car coding/repair via the forum "Message" function. The better place for such dialogue is in the forum proper. That way, the wider expertise of the entire forum community can be applied to solve your problem - thank you

Carolco Senior Member Posts: 435	Cornering lights Mk7.5 Oct 23, 2020 22:22:48 GMT Quote Select Post Deselect Post Link to Post Back to Top Post by Carolco on Oct 23, 2020 22:22:48 GMT Hello Helletcr. Why don’t you try in unit 19, to disable in byte 11, bit 1..... Drive program functions advanced front lighting system.... put in not active. You don’t have front camera. Then try If the error is gone in unit 19.