|
Post by dodelez on May 24, 2020 16:46:48 GMT
Hello guys,saw alot of manuals,enable the 19 byte bit 4 but also i need edit in Park assist and i not have it but have sterring assist and no RVC coding option jn this section for me..(MIB1) Someone have solution? (No rear camera original from the dealer)
|
|
|
Post by dv52 (Australia) on May 24, 2020 22:49:52 GMT
dodelez: If you are installing a low line rear vision camera- you shouldn't need to make any further changes (other than Byte 19, Bit 4) if you don't have a hex10 module.
Don
|
|
|
Post by dodelez on May 25, 2020 4:24:04 GMT
dodelez: If you are installing a low line rear vision camera- you shouldn't need to make any further changes (other than Byte 19, Bit 4) if you don't have a hex10 module. Don Camera setup not done yet, I wanted to first check if I can get into a black screen when I put in Reverse gear
|
|
|
Post by dodelez on May 26, 2020 19:50:16 GMT
dodelez: If you are installing a low line rear vision camera- you shouldn't need to make any further changes (other than Byte 19, Bit 4) if you don't have a hex10 module. Don Camera setup not done yet, I wanted to first check if I can get into a black screen when I put in Reverse gear Oh Suddenly it started to work ,thanks
|
|
|
Post by davideddd on Jun 18, 2020 15:11:40 GMT
Hi, how did you solve the issue?
My problem is that it seems that OBDElven doesn't save permanently the changes, I must apply the coding each time I turn on the car.
Any suggestion?
|
|
|
Post by dv52 (Australia) on Jun 18, 2020 21:59:25 GMT
^^^ david: complete guess but try entering the security code 20103 (or perhaps 71679) before making the change to the hex10 module - maybe?
Don
|
|