|
Post by patrickschulenberg on May 11, 2020 9:37:20 GMT
Hello,
I have installed led tail lights with sequential indicators. Brake lights works, fog lights work and even sequential indicators work. The only thing that isn’t working is the putter running lights. The boot (trunk) side running lights work as expected but the bodies only illuminate under braking. I will attempt to add a link to a picture.
Cheers
|
|
|
Post by patrickschulenberg on May 11, 2020 9:39:00 GMT
|
|
|
Post by patrickschulenberg on May 11, 2020 9:41:17 GMT
A little more info, the only coding instructions that were supplied were to change leuchte18 and leuchte19 to 33 LED -Modul Blinkleuchten
|
|
|
Post by patrickschulenberg on May 11, 2020 11:09:50 GMT
Thanks for your reply, changed to 38, no change. Still no body lights
|
|
|
Post by patrickschulenberg on May 11, 2020 11:13:19 GMT
I don’t need to turn the car off and back on or anything special do I?
|
|
|
Post by patrickschulenberg on May 11, 2020 11:23:46 GMT
Ok trying that. Will get back to you. Thanks for your help
|
|
|
Post by patrickschulenberg on May 11, 2020 11:35:16 GMT
Ok so followed all of your instructions with no change. Double checked all of my connections as there was a loom added for sequential indicators. All plugged, all wires connected. Weird that the exact same lights work on the body lights when braking (though brighter) but not just as running lights like the boot.
|
|
|
Post by patrickschulenberg on May 11, 2020 12:12:08 GMT
Another note, this car has halogen tails before I upgrade to these 7.5 led. Do I need to change leutche20 and 21 to reflect the leds?
|
|
|
Post by patrickschulenberg on May 11, 2020 12:42:26 GMT
I think I figured it out
My settings for leutche20 and 21 were both set as
Leuchte20BR LA71-Lichtfunktion C 20 > Standlicht allgemein (Schlusslicht; Positionslicht; Begrenzungslicht) Leuchte20BR LA71-Lichtfunktion D 20 > Parklicht links (beidseitiges Parklicht aktiviert li & re) Leuchte20BR LA71-Dimmwert CD 20 > 0 Leuchte20BR LA71-Dimming Direction CD 20 > minimize
I’ve changed 0 to 28 (as is what is set on leutche23 and 24) as well as changed minimize to maximise. Not sure what that does but it is again, what is on 23 and 24.
My car however is getting sleepy (battery) so after a drive in the morning I will do the factory reset as you suggested earlier and see how it is.
Thanks
|
|
|
Post by patrickschulenberg on May 11, 2020 14:17:42 GMT
|
|