|
Post by hiro.s on Apr 13, 2020 16:13:31 GMT
Hello. DRL enablement coding was implemented. However, the DRL disappears when the low beam is turned on. Anyone know a solution? I'm worried, so I'm very happy to tell you. .
|
|
|
Post by dv52 (Australia) on Apr 13, 2020 21:46:08 GMT
^^^ hmmm........... OK - so tell us what changes you made for "DRL enablement coding" Don
|
|
|
Post by hiro.s on Apr 13, 2020 23:35:31 GMT
^^^ hmmm........... OK - so tell us what changes you made for "DRL enablement coding" Don Hello! thank you for contacting! The coding I did is: 09 central electlics adaptation daytime runner light Fahrlicht bei tag daytime running light Only this coding is done. Japanese vehicles do not have drl.
|
|
|
Post by dv52 (Australia) on Apr 14, 2020 0:35:04 GMT
^^^ hmmm........... OK - so tell us what changes you made for "DRL enablement coding" Don Hello! thank you for contacting! The coding I did is: 09 central electlics adaptation daytime runner light Fahrlicht bei tag daytime running light Only this coding is done. Japanese vehicles do not have drl. takam: There are particular versions of mk7 built specifically for the Japanese market - so I'm not quite sure what you want. But perhaps the picture below might be of use:
If these options don't give you what you want - post up the settings on your car for these Leuchte-sets:
Leuchte4TFL LB4 Leuchte2SL VLB10
Don
|
|
|
Post by hiro.s on Apr 14, 2020 3:07:18 GMT
Hello! thank you for contacting! The coding I did is: 09 central electlics adaptation daytime runner light Fahrlicht bei tag daytime running light Only this coding is done. Japanese vehicles do not have drl. takam: There are particular versions of mk7 built specifically for the Japanese market - so I'm not quite sure what you want. But perhaps the picture below might be of use:
If these options don't give you what you want - post up the settings on your car for these Leuchte-sets:
Leuchte4TFL LB4 Leuchte2SL VLB10
Don
|
|
|
Post by hiro.s on Apr 14, 2020 3:10:00 GMT
This is also Attachments:
|
|
|
Post by dv52 (Australia) on Apr 14, 2020 8:36:42 GMT
takam: So - a small warning as background to my suggestion below: the angel-eyes (the "U"shaped lights in your picture) on a mk7 don't have a reflector with cut-off characteristics like the low-beams. The reason why the angel-eyes are switched-off with low-beams by the factory is that the DRLs can easily blind oncoming cars at night. It is for this reason that I am suggesting that you DON'T switch-on the DRLs at full illumination with the low-beams
OK - with the caveat above, try adding the set of channels below on the 2 x Leuchte-sets: Leuchte2SL VLB10 (left-side DRL) Leuchte3SL VRB21 (right-side DRL)
Lichtfunktion E > Standlicht allgemein (Schlusslicht; Positionslicht; Begrenzungslicht) Lichtfunktion F > not active Dimmwert EF > 40 Dimming Direction EF > maximum
The illumination level for the night-time lighting function in my suggestion above is set by Dimmwert EF (which I'm proposing is 40). You can change this setting to suit your wants - but please take the interests of oncoming cars into consideration in deciding this matter.
Don
|
|
|
Post by hiro.s on Apr 23, 2020 4:13:23 GMT
Hello.
I'm sorry for the reply. In conclusion, the one-click app DRL function with Turn signals was in the way.
It worked fine when turned off. Similar problems occur elsewhere.
Is it possible to tell the manufacturer how to improve?
|
|