jms11
New Member
Posts: 2
|
Post by jms11 on Mar 12, 2020 7:19:14 GMT
I have a tiguan 2020 smith keyless entry and tried to use the app on the new gen obd pro. Nope. It says no with red banner. I beleive it does not know that i have the keyless entry. Watk can i do?
|
|
|
Post by iceberg10 on Mar 16, 2020 18:15:09 GMT
Try again. I first did it with Android and it didn’t work but next in used my iphone and succes. The only thing who didn’t work was “needle sweep”. All other apps worked fine.
|
|
lwiz
New Member
Posts: 2
|
Post by lwiz on Mar 18, 2020 1:54:21 GMT
I do not have an iPhone 😔
|
|
jms11
New Member
Posts: 2
|
Post by jms11 on Mar 18, 2020 13:30:40 GMT
Yes that was it. Thx
|
|
quickalex973
New Member
https://www.instagram.com/alextrem.design/
Posts: 27
|
Post by quickalex973 on Oct 17, 2020 4:17:00 GMT
Folding mirrors when one short press lock on key 1. Control Unit 09 (Central Electrics) 2. Adaptation 3. Spiegelverstellung - Funk_Spiegelanklappung_Modus New value : by_look_command_via_remote_control_key Old value : by_convenience_operation_via_remote_control_key
Open folding mirrors when only ignition is ON 1. Control Unit 09 (Central Electrics) 2. Adaptation 3. Spiegelverstellung - Spiegel_ausklap
Autolock car when out (kessy) 1. Control Unit B7 (Start System Interface) 2. Long coding 3. easy_close New value : activated Old value : Not activated 4. Adaptations 5. internal_passive_entry_exit_byte_1 - passive_exit_door_slam_lock New value : activated Old value : Not activated Then on the infotainment screen: Car > Settings > Reset > Opening and Closing
Close car with running engine (kessy) 1. Control Unit 09 (Central Electrics) 2. Adaptation 3. ZV allgemein - Funk_bei_Klemme_15_ein New value : active Old value : not active 4. Control Unit B7 (Start System Interface) 5. Long coding 6. Terminal 15 characteristics of passive entry exit function New value : Function only allowed for terminal 15 on or off Old value : Function only allowed for terminal 15 off
|
|
|
Post by necromortis on Jan 30, 2024 13:07:40 GMT
Hi all. I set progrm for keyless entry to automatically lock when exiting the car. Everything works fine when the car is turned off. And today an extremely unpleasant incident happened to me. With the engine running, I got out of the car and it locked. And it was no longer unlocked back. The key fob in my pocket also failed to unlock the car. And so, the car is running, my phone is inside, but I can’t get in. I had to pick the lock and unlock it with a physical key. Is it possible to somehow reflash it so that it doesn’t get blocked when the engine is running? Current settings: Lock/Unlock acoustic confirmation: OFF Third Brake Light with Lock/Unlock: ON Auto Lock upon Exit: ON Central lock with IGN: OFF
|
|
|
Post by necromortis on Feb 3, 2024 11:42:48 GMT
Fix problem: Control Unit B7 (Start System Interface) Long coding -Terminal 15 characteristics of passive entry exit function New value : Function only allowed for terminal 15 off
|
|