|
Post by drestyle on Sept 13, 2016 10:52:39 GMT
Hi I have a question about the coding for
The windows, can you code them that I can prevent them from Going back when they detect that something is stuck (like a hand) the reason for this is that there is some space between up and down, so whenever I Lower my windows and I want them to close automatically again, they will go down due to the safety thing..
And B. Does anyone know where I can find the coding for my turn signals to behave as daylight running lights?
Thanks in advance guys!
|
|
|
Post by Daniel (Germany) on Sept 13, 2016 12:33:20 GMT
For your windows try to reinitiate them. You have to put window all the way down with hold the button, when its down release the button and push again down, then put the window all the way up with holding the button,when its closed release the button and push again. When this not work you have to look at the window mechanik, may there is a problem so that it is to hard for the window to bring it all the way up and then the safety system thinks there is something between the window. For turn signals on with lights i just found this on internet in a vcds thread. I dont know if it works. Go to ,09-Zentralelektrik (central elektrik) > Funktion 07 Codierung (long coding) > Byte 07 > % eintragen (write in 15 for 15% or another).
|
|