|
Post by smashervt on Jul 30, 2018 20:18:50 GMT
Hello everyone! I have had my esc light on for 3 years. I have been trying to see how to reset my steering angle sensor but I cannot find how to do it with the obdeleven unit.
When i select the clock spring picture it cannot connect to it and says no connection to it.
It is not the original clock spring as that one broke and I replaced it. Every button works but i don't have traction control. Which I am okay but my lease is coming up in a month and I am pretty sure they would notice it not working.
Any help will be greatly appreciated!
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jul 30, 2018 21:57:20 GMT
Not my car but on my one under control unit 44 Steering Assistance under basic settings there are the following options
Reset to factory setting Resetting of all adaptation values Resetting of all adaptations Software end-stop reset Steering angle sensor Steering angle sensor, initialization Steering angle sensor, move to mechanical center Steering angle sensor, zero calibration w/steer. wheel scales
If you have these items then I would suggest you search on the web to find out how to use them to solve your problem.
As its a lease car I presume it was new to you so you should be able to go through all your coding and revert it back to stock that may help with the ESC Issues.
|
|