matt
Closed beta tester
Posts: 48
|
Post by matt on May 3, 2018 17:20:17 GMT
Would it be possible to change the output tests layout? At the moment you must cycle through each test one by one but it would be much better to have a list that you can select from.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 3, 2018 18:52:35 GMT
matt this was not related to the release so i have moved it to the request section.
It would help if you added in your car details as I think that older cars
This thread explains why it is like this currently I believe.
On my car (2014) its like this video
|
|
matt
Closed beta tester
Posts: 48
|
Post by matt on May 3, 2018 18:55:52 GMT
Unfortunately the beta is the only place that seems to get any form of response on this forum from developers. This feature has been requested ongoing now for 2 years + but has always been ignored. On the newer cars you get a list as in your video but anything 2014 ish or earlier and you must cycle through one by one on every module. There is no reason it cant be a list even on older models (VCDS has it as a list)
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 3, 2018 19:59:57 GMT
Matt sorry you feel that way, i have certainly seen stuff fixed / changed on other parts of the forum but it does not matter. All I can say is the forum.obdeleven.com/thread/99/output-test is clear Notes: The Outputs that can be tested and the sequence in which they become active are controlled strictly by the Control Module. I know that this tool gives a very similar process as VCDS but they are different tools so don't always work the same. Anyway, you have raised the issue, if others feel like you please add your voice to this thread.
|
|
|
Post by Matthew on May 19, 2018 18:10:40 GMT
I know that this tool gives a very similar process as VCDS but they are different tools so don't always work the same. With VCDS you have the option of choosing between "sequential tests" vs specific output tests. With OBDeleven, it appears that it was easier to just develop the application to do "sequential" tests as depicted by the control module itself to save many lines of code giving one the option of selecting specific output tests to be done. I believe the average person does these output tests for the cool-factor and not to really test the outputs so it wasn't such a huge issue. However Matt's concern has been noted in the other threads as well by others.
|
|
|
Post by OBDeleven on May 28, 2018 8:01:33 GMT
Sorry for long delay of that function, I have added this to our work plan so it will be done in near future.
|
|