|
Post by qdeado on Mar 2, 2018 16:56:24 GMT
I would like to enable auto fold mirrors for my VW Passat B6 upon locking the car with remote. In module 42 and 52 (driv side and pass side elect) the button "Adaptations" is missing - why ?
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Mar 2, 2018 19:15:11 GMT
|
|
|
Post by qdeado on Mar 3, 2018 14:36:27 GMT
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Mar 3, 2018 15:32:00 GMT
Sorry miss read you post, so in the same link I provided there is
Fold-in function of the outside mirrors I am not sure how the increase value trans lates to use in the app. Activate the door control unit there is the VW Golf VI to activate the fold-in function of the outside mirrors. The following code is to be applied: (door electric driver.) Door driver? STG 42 STG coding -> function 07 Increase value by +4096 STG 52 (door electr. Passenger) Door passanger? STG coding -> function 07 Increase value by +4096
Not sure if this is what you are after but are you sure you car has adaption channel on these two modules.
Not my car so dont have any experience with it maybe somebody else can offer advise.
|
|
|
Post by qdeado on Mar 3, 2018 18:00:15 GMT
Nope, that is not what im after. Screenshot of my module 42 (drivers door electronics) is in my previous post.
What you suggested this time activates regular folding with a knob on drivers door (when you retrofit your regular mirrors with mirrors that have motors). My mirrors already have motors in them, all i want is them to automatically fold upon closing the car and unfold upon starting the ignition - source: forums.vwvortex.com/showthread.php?7175626-Passat-CC-auto-folding-side-mirrors-DIY-tutorial-(nice-coding-feature)
What i need is either adaptation or long coding option in obdeleven menu, and i dont seem to have that on module 42, 52 - only coding option or basic settings.
|
|
|
Post by qdeado on Mar 14, 2018 23:34:20 GMT
Up
|
|
|
Post by qdeado on May 15, 2018 10:21:00 GMT
UP Where or who should i write to to maybe get adaptation modes in module 42 and 52.
|
|
|
Post by OBDeleven on May 28, 2018 10:01:28 GMT
Your vehicle have an older generation door control module and this is the reason why adaptation function is not appearing, OBDeleven system perform request for the supported functions when connecting to control unit and automatically hide buttons of functions that is not supported by control unit in your case Adaptation function. As I know there is no way to activate auto folding mirrors on that generation of control unit.
|
|