|
Post by a38vquattro on Sept 6, 2023 16:05:34 GMT
Hello, i cant find anywhere is it possible to activate DPF light on the instrument cluster when normal regeneration starts and it turns off when its done just to know when it is regenerating? Thanks!
|
|
otzi
New Member
Posts: 21
|
Post by otzi on Sept 7, 2023 12:52:24 GMT
Hello
Would be great if what you mentioned is possible. In the past I did some research but did not find a way of doing this. If anyone knows, please let us know.
Personally I use the below device with success on my A3FL with CRLB engine:
Video is in Polish, but in short. As shown in the video the device is pluged in to the OBD socket.
Then it works like: - when DPF regeneration is started it emits some series of beeps and the LED lights red, - when DPF regeneration is finished it emits 3 beeps and the LED is off, - there is also button on the device and: - when you press it briefly, the device emits number of N beeps and each beep means 1g of soot e.g. 10 beeps == 10grams of soot - when you press it and keep longer, for few seconds, it will clear all the error from the control units of the car
|
|
|
Post by a38vquattro on Sept 7, 2023 13:40:16 GMT
Hello, yes there is no info about this anywhere, so i decided to ask here but it looks like it is not possible, that light is only for when DPF is malfunction i guess.. anyway i have the same engine CRLB and i use VAG DPF app for monitor regeneration and i have no problems.
|
|