|
Post by schraub on Aug 23, 2023 20:37:35 GMT
Hi Guys, i got my new born last week and want to do some changes with obdeleven but i am not really successful
First of all i wanted to activate the "real" traffic sign recognition (i only have the one via navigation so at sample constuction speed limits doenst work)
So i checked some examples at the internet with other cars but maybe they have other moduls
What ive done: STG A5 -> coding -> VZE -> coded (was already coded)
STG 5F > Adaption > … > "Car_Function_List_BAP_Gen2-traffic_sign_recognition_0x21" > aktivated > "Car_Function_List_BAP_Gen2-traffic_sign_recognition_0x21_msg_bus" > "Datenbus Extended"
In some forum i found that i have to activate the following parameters:
STG 5F > Adaption > Kanal "Car_Function_Adaptations_Gen2-menu_display_road_sign_identification" > activated > Kanal "Car_Function_Adaptations_Gen2-menu_display_road_sign_identification_over_threshold_high" > activated
but i couldnt find the menu for Car_Function_Adaptations_Gen2
Also there was the step
"STG 82 > Codierung > Byte 00 > Bit 0 "
but i dont have this Stg.
Can you help me?
Regards schraub
|
|
|
Post by schraub on Aug 26, 2023 10:52:59 GMT
Hey, yesterday, i took a little time and tried some settings.
I found the missing parameters
Car_Function_Adaptations_Gen2-menu_display_road_sign_identification und
Car_Function_Adaptations_Gen2-menu_display_road_sign_identification_over_threshold_high
on the stg
(8125) Applikationsserver 3 System 1 Infotainment(8125) Applikationsserver 3 System 1 Infotainment
Can someone with working camera based tsr on Born, ID3 etc. tellt me the following values for your car:
(8125) Applikationsserver 3 System 1 Infotainment -> anpassung -> Fahrzeugfunktionsliste BAP -> traffic_sign_recognition_0x21_msg_bus
I used Datenbus Extended but i am not sure if its correct.
thanks
|
|