Auto Coming Home Lights 09 Central Electronics Adaptation Select – Aussenlicht_Uebergreifend Coming Home Verbaustatus - From manual to automatic
Comfort Blinker Cycles 09 - Central Electronics Adaptation Select – Aussenlicht_Blinker Komfortblinken Blinkzyklen – From 3 to Your chosen value
Note that the acceptable range is 1 to 5 and the default value is 3 *Reset MIB Lighting Setting to Complete
Off Road Display
5F - Information Electronics
Long Coding (Text mode) - Byte_24_Navigation_System -> On
Adaptation Select - Car_Function_Adaptations_Gen2 - menu_display_compass -> active - menu_display_compass_over_threshold_high -> active Select - Car_Function_List_BAP_Gen2 compass_0x15 -> active compass_0x15_msg_bus -> Comfort data bus
Reset the MIB unit - Press and hold the ON/OFF button on the infotainment unit for greater than 10 seconds.
DRL Option in MIB  Central Electronics Adaptation Select – Aussenlicht_Front Tagfahrlicht Aktivierung durch BAP oder Bedienfolge moeglich - Activate
Lock/Unlock Sound  Central Electronics Select - ACKNOWLEDGEMENT SIGNALS Select ACTIVE for Akustische Rueckmeldung entriegen if you want acoustic feedback for unlock Select YES for Akustische Rueckmeldung verriegeln if you want acoustic feedback for lock Select ACTIVE for Menuesteuerung akustische Rueckmeldung (Acoustic lock menu)
In-car procedure: Press the CAR button on the RHS of the infotainment screen Select SETUP on the bottom RHS of the screen (looks like a cog) Select Opening & closing panel Place a tick in Acoustic confirmation box. The facility can be turned ON/OFF via this switch
If admins could put this post to top of thread and I will continue to check and add
Scandinavian DRL Select Control Unit 09 (Central Electrics) Security access Access Code 31347 Adaptations Select: Aussenlicht_Front Select: Tagfahrlicht-Dauerfahrlicht aktiviert zusaetzlich Standlicht Value: Active (orginal inactive)
Comming Home/Leaving Home with DRL and Fog lights Select Control Unit 09 (Central Electrics) Security access Access Code 31347 Adaptations Select: Aussenlicht_uebergreifend Select: Coming home leuchten Value: Fog light (orginal Low Beam)
Blower display in auto operation Select Control unit 08 (Air condition A/C) Control unit Long Coding Blower display in auto operation: Activated (orginal: Not activated)
That's the driver assist (lane and cruise) I think I noticed the bobbles bouncing when changing the view, which it doesn't do on default
So can't get into infotainment module do to needing a security code (20103 didn't work, it accepted it but if you try to go into long coding then you get a red box with "something went wrong" or if you go into adaptions you get the red box when trying to get into any of them) so presume it's a code generated of the serial number like needed to activate VIM
Bit more playing and was able to get into module 5F, had to clear the app data on the android, so entered 20103 and went into long coding, byte 18 set to 0-10 they change the boot up logo, and yes I had to reboot the unit every single time (press and hold the on/off for 10 seconds
0 welcome to Volkswagen 1 twin drive 2 gtd 3 gti (this actually changes all the blue lines to red) 4 bluemotion 5 egolf 6 R 7 R 8 alltrack 9 gte 10 elegance
also messed about with skins on byte 17, nothing seemed to change tho, but was getting bored with resetting the unit
Depends what apps your talking about, there are a couple of codings I've seen that need tweaking to work on the 7.5 and there are some hardware changes that will make sure the tweaks don't work at all, all depends on how quick obd11 writer implement then, TBH it would be better to use coding rather than apps on newer untested cars, that way you can see if it works and if not why it doesn't Would be nice if they had a bit where you could write your own apps, then they could look into them then add them to their own app list
dv52 (Australia): vcds: likely your BCM doesn't support long coding. ALL of the software switches that were previously in long code are probably in adaptation channes
Jan 11, 2020 12:50:39 GMT
m4v3r1ck: Hello, the voltage threshold is too low... when the car have ignition on, produce more of 12V. I've set 12.1 because is the maximum and SS still working. Some times ago, some friend told me that them managed to set a value higher than 12V; now now I can't.
Jan 11, 2020 16:32:04 GMT
perrycucko: Hey is it possible to remove the 270km/h speed limiter on A8 D4 4.0 TFSI with obdeleven. Thanks in advance.
Jan 12, 2020 10:02:49 GMT
tarragona1980: how to activate lower left rearview mirror when I put gears with obedelven. I have seate ibiza fr 115 hp 2018
Jan 12, 2020 17:20:31 GMT
powaking: 2014 Q7. How easy is it to enable green screen with ODBeleven?
Jan 12, 2020 19:33:02 GMT
bndo: Anyone activated Auto Lock/Unlock in a VW Polo??
Jan 12, 2020 22:16:37 GMT
dv52 (Australia): m4v3r1ck: whether the "voltage method" works to disable SS depends on the car type and the build year. This tweak WON'T work on the newest MQB platform vehicles (regardless of the voltage value that you set).
Jan 13, 2020 3:22:44 GMT
dv52 (Australia): tarragona1980:Mirror dip on reverse needs a memory module fitted to the passenger-side door module to operate successfully. Does your car have this? Find-out how to test if your car has the memory module on this link i.imgur.com/UuwTmXM.png?1
Jan 13, 2020 3:28:50 GMT
mickjaggy: what is this AID1 and AID2 u guys are talking about ?
Jan 13, 2020 6:29:37 GMT
luziol: dv52 (Australia: would you please provide the proper way to disable SS on newest MQB platform? Min/Max temperature method is not available and voltage method does not work.
Jan 13, 2020 9:47:19 GMT
pablos59: La mia Troc mi da questo errore U101400 cosa devo fare?grazie
Jan 13, 2020 20:00:22 GMT
dv52 (Australia): luziol: hmmm.... I would if I could!!! . I believe that no one has found a coding solution (yet). But lots of hardware solution (including my design auto-SS-kill-switch which you can find on the VWWatercooled site)
Jan 13, 2020 21:58:07 GMT
redx636: Can this tool be used to bring AC servo motor to Service position. This note is in the manual: "Before a servomotor is removed, the Service function (SF) must be started with vehicle diagnostic system"
Jan 14, 2020 2:11:29 GMT
luziol: dv52 (Australia): Thanks for info. I need to be a little more patient then
Jan 14, 2020 8:50:23 GMT