|
Post by normanrs6c8 on Jun 1, 2023 20:49:36 GMT
Hello, my dears, I'm new here, looking forward to any help. I have the OBD connector and am allowed to drive an RS6 C8. Unfortunately, I can't use my panoramic roof like I know it from the RS6 C7 because I'm constantly blinded by the sun. In the C7 you could control the sun protection (the sun net) separately from the panorama roof. You could open the glass roof and keep the sunshade (the sun net) closed. In the C8, I always have to close the panorama roof so that the sun protection (the sun net) closes. I can't use the panorama roof at all in the city or on the country road as I would like. Does anyone have a tip on how I can implement it with OBDEleven? I would be very happy about a tip! Thanks so much Norman PS: I found this in the forum, unfortunately it doesn't work properly with OBDEleven: forum.obdeleven.com/thread/6248/
|
|
wooop
New Member
Posts: 5
|
Post by wooop on Jun 27, 2023 10:30:34 GMT
Hi, do you have PRO or Ultimate? Try changing in sunroof module long coding "Sequential_processing_sunroof_and_blind" from active to not active or from not active to active, I don't know what's your option is set now.
|
|