|
Post by patman28 on Apr 22, 2023 15:03:10 GMT
Hey what settings are changed when using the App to decode Auto Start stop in case i have to revert it? 2018 Audi A3 Facelift.
|
|
|
Post by whataboutthis on Apr 22, 2023 20:41:46 GMT
If nobody tells you the answer its very simple.
First do a full backup.
Run the app
Then do another backup and compare the two, if you excel it will take you about two minutes.
And whilst I know it cost credits you can always turn it off using the app.
|
|
|
Post by dv52 (Australia) on Apr 22, 2023 22:11:28 GMT
patman28 : if you want to revert the SS tweak to factory setting - do this:
- Go to the Gateway module (@ address hex19)
- Select Adaptation
- Enter "voltage" in the search box and select Start/stop start voltage limit
- Change value to 7.6
Don
|
|
|
Post by patman28 on Apr 24, 2023 1:12:27 GMT
Hey the Value is allready Set to 7.6 but the temperature is Set on 50 degrees maybe thats whats changed?
|
|
|
Post by sergi0dj on Apr 24, 2023 14:07:27 GMT
Hello friend, by default, a value is negative, (-50), its value has been modified and for this reason the start stop system does not work, correct that value and mark -50 degrees in both cases and try. ibb.co/0JmCCj6
|
|
|
Post by patman28 on Apr 27, 2023 7:30:24 GMT
Thx, i'll try it
|
|