|
Post by confusion on Mar 5, 2023 22:31:57 GMT
Hello, good morning
The drl lights in the car work for me and the rear lights are off.
When I put the position, they turn on but the drls are dimmed.
I would like to know how to turn on the front and rear of the car.
And also how I increase the brightness when the crossing ones are on.
Thank you
|
|
|
Post by dv52 (Australia) on Mar 6, 2023 20:39:13 GMT
So, if I understand correctly, you want the tail lights to operate in DRL mode. The easiest way to do this (IMO, of course) is to implement the so-called "Scandinavian DRL" tweak - see my visual instructions below.' As for your second want (greater illumination of DRLs when low-beams are turned-on) - it's important that you heed my note of caution! There is a very good reason why the DRLs on your car are dimmed during night-time operation - it's because the front DRL fittings in the headlights don't have reflectors with cut-off characteristics. This means that too high a DRL illumination level during nighttime will blind on-coming traffic. So, be very careful NOT increase the illumination level too much!! I'm assuming that this car is fitted with incandescent front DRL (i.e. the car is NOT fitted with LED type DRLs). If so, do this: - For Leuchte4TFL LB4 and Leuchte5 TFL RB32, look through the 8 x Lichtfunktion channels for the Leuchte-command Standlicht allgemein (Schlusslicht; Positionslicht; Begrenzungslicht). There should be ONE instance of this Leuchte-command in each Leuchte-set!
Note the Alpha value for the Lichtfunktion channel and increase the number value on the corresponding Dimmwert channel.
For example, if the Alpha value is E (i.e. the identified channel is Lichtfunktion E) - increase the setting of Dimmwert EF
Don
|
|
|
Post by confusion on Mar 20, 2023 2:05:22 GMT
OK thanks I will follow the instructions and I will tell you
|
|