|
Post by mkvjames46 on Jan 27, 2023 5:31:00 GMT
I have a 2017 audi a3 quattro. Defrost motor suck code. Pulled motor to check to see if flap was stuck, it wasn't. Also tried another motor, both motors work when not mounted. Saw on YouTube that there's an adaptation procedure. But they did it with a fancy scan tool. Does anyone know the procedure with obd11?
|
|
|
Post by dv52 (Australia) on Jan 27, 2023 21:42:46 GMT
James: Hi. hmm..... very little SPECIFIC information in your post (alas).
What PRECISELY is the "Defrost motor suck code" and which EXACTLY is the "YouTube ...........adaptation procedure.........with a fancy scan tool" - which I assume is VCDS (ain't nothing "fancy" about VCDS - it's pretty-much as "fancy" as OBD11)!
have you tried implementing this procedure (it's for a mk7 Golf - but the Audi A3 is built on the same MQB platform, so the same may apply)?
Don
|
|