|
Post by swisstony on Sept 5, 2022 11:47:42 GMT
Hi everyone New to the forum and well new to Audi and OBDeleven, so literally a novice However keen to learn and get prepared for the next project which is retrofitting cruise control into my Audi A4 B7. This is a 2006 model with the Multi function steering wheel. I already have the dash trip functions available I have an OBDeleven with pro subscription using an Iphone My query is about the codes and the process as there seems to be some queries or conflicts on what code to enter, how to access Engine Code II ? So I was wondering of anyone has successfully done this using an iPhone ( please say yes as I hate android ) and a simple guide on how to do it Much appreciated
|
|
|
Post by swisstony on Sept 7, 2022 6:57:02 GMT
Maybe my question was a little too generic, just after some pointers. First time plugging in my OBDeleven pro yesterday to test it, all looked good but when I came to clear faults it just sat there with this error code . No matter if I turned the ignition off, quit the app and restarted it, rescan , still get the error. which kind of makes me think when it comes time to use this device for the cruise control install, I will get into a load of issues
|
|
|
Post by swisstony on Sept 24, 2022 18:17:48 GMT
Guessing noone uses these boards any longer, shame
|
|
|
Post by samtheman on Dec 6, 2022 13:14:02 GMT
Guessing noone uses these boards any longer, shame I have the same issue I can’t access coding ll
|
|
|
Post by samtheman on Dec 6, 2022 13:23:59 GMT
Hi everyone New to the forum and well new to Audi and OBDeleven, so literally a novice However keen to learn and get prepared for the next project which is retrofitting cruise control into my Audi A4 B7. This is a 2006 model with the Multi function steering wheel. I already have the dash trip functions available I have an OBDeleven with pro subscription using an Iphone My query is about the codes and the process as there seems to be some queries or conflicts on what code to enter, how to access Engine Code II ? So I was wondering of anyone has successfully done this using an iPhone ( please say yes as I hate android ) and a simple guide on how to do it Much appreciated Look like you need a android and the iOS app is useless
|
|
|
Post by whataboutthis on Dec 6, 2022 19:24:28 GMT
I have the same issue I can’t access coding ll Yes I am afraid this is one of the many things they still have not completed on IOS you will need Android phone / tablet to do that I am afraid. First time plugging in my OBDeleven pro yesterday to test it, all looked good but when I came to clear faults it just sat there with this error code . No matter if I turned the ignition off, quit the app and restarted it, rescan , still get the error. Personally I have not seen this issue before so I would suggest you contact support team directly, they should be able to help you. You can get hold of support by using the in app help function or email support@obdeleven.com Hope that helps
|
|