|
Post by naitsabes on Sept 4, 2022 21:31:08 GMT
Hi guys,
Can someone with AudiSoundSystem share with me the adaptation and long coding values they have? Regarding Multimedia 5F control module.
I would be very grateful!
Thank you!
|
|
|
Post by dv52 (Australia) on Sept 4, 2022 22:57:23 GMT
hmm......... how will this information be useful without having much more knowledge about the car, the build, the installed equipment, the country and precise details about the hex5F module?
It's like asking for advice about a medical problem - but providing no more information about the nature of the illness!!
Don
|
|
|
Post by naitsabes on Sept 5, 2022 13:23:22 GMT
Hi Don, . Regarding my demand. I retro-fitted the audi sound system with 9+1 speakers on my A3 8V facelift with previously 8 passive speakers. I want a list with the adaptations coming from an A3 8V which had the audi sound system from factory so I can compare with what I have in my MMI. It does not really matter which 5F unit the other user have. Either being Harman or Delphi. My issue is that after the retrofit there are not only low frequencies coming from the subwoofer, it is acting like a normal speaker, not like a sub. I am aware that I need to upload a list with parameters via ODIS or VCP but until then I want to check if there is anything I can force the subwoofer (channel 6 on MMI) to only respond to frequencies lower or equal with 100Hz, so only bass will be coming from it, and no mids or highs. I want to compare my adaptation values with someone which already had the 9VD sound system from the factory and see if I can find something there. Thanks again for your activity on this forum .
|
|
|
Post by dv52 (Australia) on Sept 6, 2022 1:37:02 GMT
naitsabes: OK - thanks for the additional information. I don't have the factory values for the Audi-sound systems
|
|