reece
New Member
Posts: 1
|
Post by reece on Apr 9, 2022 18:40:53 GMT
Hey all I have a USB port that looks something like the following: I am planning to MIB Patch my MIB for Carplay and maps etc, I was wondering if I was able to activate this port via coding via the following: - Control Units > 5F > Information Electronics >Multimedia > Extended Coding > Byte_19_USB = "USB_iPOD" Would this activate the port to full functionality or would I need to retrofit a more modern port? Thanks Reece,
|
|
mush
New Member
Posts: 11
|
Post by mush on May 5, 2022 20:28:29 GMT
HI Reece,
I am also in the same situation, I ask Audi dealer and they ask for 400 euro. I think we need the path the MIB but I still do not how.
regards,
Umer
|
|
|
Post by dv52 (Australia) on May 5, 2022 21:39:33 GMT
hmm.......I'm not sure of the specific case of car_play - but the software switch positions for USB operation on the hex5F module are like this:
Byte 19Byte 6
| Byte 7
| USB Function
| 0
| 0
| USB off
| 1
| 0
| USB Charge
| 0
| 1
| USB Full
| 1
| 1
| USB iPod
|
There are equipment variations for the last 2 x options
Don
|
|
mush
New Member
Posts: 11
|
Post by mush on Jul 29, 2022 12:41:11 GMT
I am able to enable the android auto and apple carplay. In 5F- adaptation - Vehicle configuration - activate the following Smartphone_interface_for_rhmi Apple_DIO Google_GA Apple_DIO_wireless (maybe just do it) Google_GAL_wireless (maybe just do it) long coding Byte 19 Byte 6 make it 1 Byte 7 make it 1 USB Function USB iPod If you have charge only UPS, You need to replace it because it does not have a data connection with the main unit. you need the MIB 2 CarPlay MDI USB AUX Plug Socket Switch Button FOR A3 8V www.aliexpress.com/item/1005001617562124.html?spm=a2g0o.cart.0.0.26b838daQnYgQA&mp=1
|
|