|
Post by pocketmaster on Mar 25, 2017 13:25:16 GMT
What is the long coding used to change the rear brakes? Can the OBDEleven calibrate once they are changed or is the calibration done automatically in the system ??
|
|
|
Post by marcviii on Sept 6, 2019 13:27:42 GMT
I found it's much easier to take two lengths of wire and a 12v source (extra car battery) and touch them to the leads of the sensor. It will either tighten or loosen based on which lead you attach.
This is a video of what I'm stating. Super easy.
|
|