|
Post by dannyrs3 on Feb 28, 2021 19:46:52 GMT
I have keyless entry - somewhere I saw a tweak that allows you to lock the car while it is running with the Key fob, but I cannot find it again. Does anyone have a adaptation required for this? Would be nice to be able to warm the car up and pop back into the house, or move my other car out of the way without fear someone can jump in and drive away
|
|
|
Post by dv52 (Australia) on Mar 1, 2021 21:41:25 GMT
Try: changing ZV allgemein-Funk bei Klemme 15 ein to active in Central electrics module @ address hex09 (with 31347 as the security code - if needed)
Don
|
|
|
Post by dannyrs3 on Mar 2, 2021 0:24:36 GMT
Thanks Don, that did the trick!
|
|
|
Post by chally169 on Feb 17, 2022 19:33:51 GMT
Does this work with the non keyless cars? Ie using the spare key to lock/unlock the car whilst the original key is in the ignition with the car running?
|
|
|
Post by dv52 (Australia) on Feb 18, 2022 3:23:28 GMT
hmm........ not sure. Why not try it - if it doesn't work, just revert channel setting
|
|
|
Post by edwarde on Nov 11, 2022 0:42:22 GMT
I could not get this feature to on work on my 2015 Audi A6 I tried through the apps and also looked on gateway and comfort module can someone please help ..
|
|
|
Post by dv52 (Australia) on Nov 11, 2022 6:16:42 GMT
edwarde : So, here's the thing - your MY15 Audi A6 is built on a MLB platform whereas the cars that are the subject of this thread have a MQB platform base. The "B" and the "Q" are important differences. "Also looked on gateway and comfort module"? Not sure why you would look in these modules. On MQB cars, the channel is in the hex09 module (as I say in my post above) - if a similar channel does appear on your car, I would have thought that you would have looked @ address hex09 (on your car) Don
|
|