|
Post by C8 test driver on Oct 30, 2020 19:19:07 GMT
Well, since working on various updates to my C8 45TFSI (with matrix LED, but not activated), I started to chart the changes I made.
I am still trying some (I wish I could get the engine data display of torque and power to work).
I have included JPG links to images created from the excel spreadsheet I created, showing what worked, what didn't, the conditions, and what I haven't tried yet.
Of course this is all try at your own risk.
I figured it would be good to have the options documented.
Some of these were found by Q8 and A8 owners and taken from A5 lists, some I stumbled upon on my own. The images are hosted on the photo share site that this OBDeleven forum recommends - imgbb.com
Link to PDF
Links to image JPGs of grid (in case you don't want to download the PDF)
|
|
|
Post by tempos84 on Oct 31, 2020 7:42:57 GMT
Great job, man! I used to protocolize this on my previous VW Tiguan2, but didn't follow at A6.
|
|
|
Post by C8 test driver on Nov 2, 2020 17:20:28 GMT
Thanks
|
|
|
Post by aquarian on Nov 29, 2020 20:57:56 GMT
Super helpful. Thank you.
|
|
josef
New Member
Posts: 2
|
Post by josef on Dec 4, 2020 21:12:20 GMT
Hi Could you help me with night vision retrofit coding?
|
|
|
Post by beogradjanin on Dec 4, 2020 21:56:21 GMT
Any idea how to increase the sensitivity of windshield wipers in AUTO-mode. My settings are at maximum and it's still very sluggish.
|
|
|
Post by C8 test driver on Dec 4, 2020 23:11:08 GMT
sorry I can't help either of you, hopefully others can.
|
|
|
Post by pwdrskr on Jun 22, 2021 13:13:42 GMT
Thank you for posting this list. I used it yesterday to make a few changes to our '21 A6 Allroad that either didn't have an app or the app wouldn't work to make a change. I was able to get the needle sweep to work for example via an app. However, I haven't been able to get the gear number to appear in the DIS by either the app or using the direct coding in the spreadsheet. The coding says "ON" for both "D" and "S" modes, yet there are no gear numbers. Similarly, I'd like the parking brake to automatically engage when the transmission is put into Park. I have this coded on our '19 RS5 and really like it. Without the parking brake engaged, the car will roll back slightly after putting it in park. this matters as it results in the garage door hitting the back of the car when it closes. Of course I could park further into the garage, but its a tight fight already...and I want to make this work. Well, since working on various updates to my C8 45TFSI (with matrix LED, but not activated), I started to chart the changes I made. I am still trying some (I wish I could get the engine data display of torque and power to work).
I have included JPG links to images created from the excel spreadsheet I created, showing what worked, what didn't, the conditions, and what I haven't tried yet. Of course this is all try at your own risk. I figured it would be good to have the options documented.
Some of these were found by Q8 and A8 owners and taken from A5 lists, some I stumbled upon on my own. The images are hosted on the photo share site that this OBDeleven forum recommends - imgbb.comLink to PDF
Links to image JPGs of grid (in case you don't want to download the PDF)
|
|
jacky
New Member
Posts: 1
|
Post by jacky on Jun 22, 2021 14:44:45 GMT
Thank you very very much for sharing these!
|
|
|
Post by C8 test driver on Jul 7, 2021 22:13:08 GMT
No problem in sharing.
Regarding the coding I did this on a pre MIBIII car, MIBIII has some additional items locked.
|
|
|
Post by tegheim83 on Oct 23, 2021 9:00:33 GMT
Do you know how to disable rear wiper when Reverse if front wiper is on? I never want my rear wiper to engage without me choosing it.
Thanks for the list!
|
|
|
Post by C8 test driver on Oct 28, 2021 19:06:25 GMT
I am sorry, I don't, possibly a different member knows, possibly post the question as a new topic.
|
|
pitty
New Member
Posts: 43
|
Post by pitty on Jun 9, 2023 15:07:03 GMT
Is there any possibility to have the link for the pdf file? Many thanks
|
|