bobp
New Member
Posts: 1
|
Post by bobp on Sept 18, 2020 21:45:28 GMT
Hello from US. (Brighton, Michigan) 1996 Rialta. Constructed on 1995 T4 cab/frame. ACU 5 Cylinder. Automatic. OBD1 with two connectors.
Received OBDeleven Dongle Today. (Ordered Amazon yesterday. Amazing quick) Connected and working fine. For this model only seeing Engine and Transmission Modules which is what I expected.
There are many unmarked channels etc.
Has anyone else with a T4 used OBDeleven in this configuration---2x2?
My goal is to see the real time values for the ignition control sensors and understand each. This seems to require an understanding of the data in the different channels.
Appreciate any advice/table that clarifies the sensor data that can be read using this hardware/software on this vehicle.
Best Regards,
Bob P
|
|
|
Post by Thirsty on Sept 19, 2020 8:57:19 GMT
There is a list for gasoline engines. It contains "standardized" measuring blocks for engines starting about 1999-2000. You could give it a try: www.ross-tech.com/vag-com/m_blocks/Don't know how much your engine differs from that list.
|
|