|
Post by astepanov on Sept 13, 2020 6:38:09 GMT
Hello team, I have new superb with 2Q camera. It has lane assist from the factory. I was able to enable adaptive lane assist, no issue. Now I want to enable traffic jam assist and emergency assist. I did it several times on MQB platform for old 3Q cameras (Tiguan, Kodiaq, Passat B8, etc.). TJA on 3Q cameras is enabled by just uploading ZDC container with parameters via VCP to A5 block, no need to do any coding. But for 2Q cameras I heard that there is no need in parameters set upload to A5 camera, I just need to enable in via coding to blocks. Could you please confirm this. If so, could you please share with me required changes in coding that I should apply to enable TJA and EA on MQB with 2Q camera? I found the following instruction for MQB Evo platform, but I am not sure that they are right for this situation: www.ascoding.ch/en/activate-traffic-jam-assist-tja/
|
|
|
Post by caner991 on Sept 21, 2020 8:34:36 GMT
hello 2020 how did you activate superb lane assist? Can you tell me the codes please?
|
|
|
Post by iasmin90 on Dec 9, 2020 19:00:54 GMT
Hello,
Did you manage to test it?I have a kodiaq MJ21 and it has 2Q camera.
Thank You!
|
|