pt16a4
Junior Member
![*](//storage.proboards.com/forum/images/stars/star.png)
Posts: 80
|
Post by pt16a4 on Oct 27, 2020 20:51:15 GMT
Hi I have the same problem with my 2017 A4. I have first tried to activate Lane Assist through the 2 step in Apps and then getting faults for Lane assist and pre sence. Then I tried to undo the settings in apps but getting faults when trying. After that I tried manual coding and still got the same faults. Then i tried to inaktivate the settings trough the 2 steps Apps and I am now back to default settings. I have lost my points by using the Apps but I have no faults and not Active Line Assist. When I tried to do this I hade the bonnet open and I’ve reset the mmi after programming. I noticed that the EFP was not active after doing the apps coding and I couldn’t activate it first but when did it by longcoding it changed. Next step would be to try doing it manual again and see I will work. Similarly when coding EFP, I noticed it wouldn't take. Despite a positive green message that coding has been accepted, EFP remains uncoded. Ultimately, I had to revert all changes because of this. Is there something I'm missing?
|
|
misha
New Member
Posts: 5
|
Post by misha on Nov 4, 2020 7:30:03 GMT
Morning all!
I've got another questions. I've installed app for Activ Lane Assist without on/off button. Everything works well, Lane Assist starting work since about 65km/h. Is it possibile to change a speed when this option is turning on?
|
|
|
Post by niccoo on Nov 17, 2020 16:47:19 GMT
When I wanted to activate this optin, I decalibrated the windshield. Attention !!!
|
|
|
Post by oil1212 on Jan 13, 2021 13:18:02 GMT
Hi guys, new the the forum.
I have a 2020 S4 Avant, which I believe has the pre-sense (logo comes up at top of dash when I start the car) so would this coding work for my vehicle?
Happy enough using the OBD, coded wireless carplay via this forum also.
Any advise or help would be great.
Thanks
|
|
|
Post by fabianaudi on Jan 26, 2021 16:14:04 GMT
Ok got it working on my audi a4 b9 2016. The one thing that didnt worked during the longcoding on obdeleven was that the “EFP” wouldt go from not coded to coded. But here is the trick! Go to the longcoding in hex in the A5 modul and then select byte 12 and bit3 (EFP) you can thick it and after that EFP is active!
After that the lane assist is working and i got zero faults during the process.
|
|
|
Post by nmiller on Apr 12, 2021 20:12:06 GMT
Does anyone know what exactly changes in the background, in the long coding, when we use OBD Apps(step 1 and step 2 )? From which byte-bit value goes to which? I need to revert it back so I can clear all warnings and errors that I got during unsuccessful coding through apps.
|
|
|
Post by vinhouw on Jun 26, 2021 0:52:41 GMT
It didn't work for me on my 2020 A4 premium US model.
|
|
pt16a4
Junior Member
![*](//storage.proboards.com/forum/images/stars/star.png)
Posts: 80
|
Post by pt16a4 on Dec 1, 2021 17:56:56 GMT
Have finally coded ALA. 2016 A4 B9. I cannot speak for others, but I also had two faults (Lane Assist & Pre Sense) when following the suggested coding, with ALA shown as "currently unavailable" within the MMI.
I worked through the steps, and skipped coding the 09 Central Electrics, which was the point that always returned the errors. Everything looks and works fine without coding "Heading Control" within Central Electrics - I can change the available settings within the MMI. Tried the car on a highway: ALA shows in the VC, the small ALA display lights up within the gauge cluster (orange unavailable or green available) when lines are present, car stays within the lane.
Again, I cannot say this is the right coding, but skipping Heading Control under Central Electrics has cleared the faults, and the system appears to work well.
|
|
|
Post by meramez on May 21, 2022 21:52:42 GMT
Went fine, A4 2022. The only thing was going wrong was an error message regarding "Side Assist" as my vehicle didn't have blind spot warning, excluding this and all went fine. (Lane change Assistant coding in 17 - Dash Board) My question is, how to activate the "Steering Correction" in the MMI? not my coding but i did think it would be nice to share ![:)](//storage.proboards.com/forum/images/smiley/smiley.png) link to original post below Here is the coding and adaptations that I used to activate Audi Active Lane Assist, I am not making any promises or assuming responsibility, code at your own risk, But it worked perfectly for me. I do get a few faults but I think it is due to me trying to activate Traffic Sign Recognition. UPDATE: Unchecking the option for STA in A5 coding (Byte 16->Bit 5) and you will no longer get the congestion assist fault code. You will get a few bings from your car about Pre Sense Malfunction, these will all go away once you are done. This will activate the self steering, steering wheel vibration, and lane crossing warning. Do all the coding then do adaptations. If using OBDEleven use all the directions only on the left half of the "|" symbol, if using VCDS use all the directions on the right side of the "|". UPDATE: Security codes: A5- 20103 ALL Coding: A5 - Frt Sens. Drv. Assist HC>Active | Byte 16>Bit 7 EFP>Active | Byte 12>Bit 3 17 - Dash Board (One of these may already be on, make sure both are) Lane Assistant>Active | Byte 4>Bit 6 Lane Change Assistant>Active | Byte 5>Bit 3 09 - Central Electrics Heading Control Config>heading_control | Byte 35>Bit 0 44 - Steering Assistance Heading Control Assistant>Active | Byte 2>Bit 7 ALL ADAPTATIONS: 5F - Information Electronics Car_Function_Adaptations_Gen2>menu_display_Lane_Departure_Warning = Set Value to “Activated” Car_Function_Adaptations_Gen2>menu_display_Lane_Departure_Warning_over_threshold_high = Set Value to “Activated” Car_Function_List_BAP_Gen2>LDW_HCA_0x19> Set Value to “Activated” Car_Function_List_BAP_Gen2-LDW_HCA_0x19_msg_bus> Set Value to “Terminal 15” A5 - Frt Sens. Drv. Assist BAP Personalization = Set Value to “Not Activated” Personalization of lane dept. warning Cl. 15 on = Set value to “Last Setting” System mode, lane depart. warn, = Set Value to “Selection via menu” Switch-on condition, lane depart. warn. = Set value to “On” (I had to toggle this as this is the final step that I believe mimics pressing the button to actually activate it. You know it was successful when the Lane markings show up in the VC) You can tweak the vibration intensity, warning time, and steering effort in these A5 adaptations: UPDATE Directional stabilization assist driver inact deactiv threshold (3 options) Directional stab. assist.: intensity: steering wheel vibration (3 options) Directional stab. assist.: intensity: power steering support (3 options) www.audiworld.com/forums/a4-b9-platform-discussion-212/coding-turning-audi-active-lane-assist-all-cars-pre-sense-2907906/
|
|
ysn
New Member
Posts: 20
|
Post by ysn on Sept 26, 2022 22:47:49 GMT
2020 A4 with pre sense, used Lane Assist Step 1 app, and Lane Assist Step 2 showed NOT SUPPORTED, what's wrong with it
|
|
|
Post by sergi0dj on Oct 5, 2022 19:58:38 GMT
update, the auto highbeams do work. figured out you just need to always activate them at night. they dont go on automatically.. is this same for others ? What steps did you follow to activate the automatic high beams?
|
|
|
Post by dario00 on Oct 6, 2022 21:07:43 GMT
so found this on some china coding list
Lane Departure Warning & Lane Assist button generate
Lane departure warning function Creates a button on the air condition
A5 Driver Assistance
long coding --> ALDW handling -->
old coding fas key
new coding carmenu
dont have the car right now to test it maybe somebody else found this
or will order the stalks with lane assist button
|
|
|
Post by pavokovic on Oct 14, 2022 22:41:51 GMT
Have you discovered anything about this?
|
|
|
Post by dario00 on Oct 15, 2022 12:12:16 GMT
Works on audis with LCD climatronic panel
|
|
|
Post by pavokovic on Oct 15, 2022 13:26:26 GMT
I couldn't find the coding for it and how it works, if you can be a little more detailed
|
|
|
Post by dario00 on Oct 24, 2022 2:16:32 GMT
does not work on B9 A4, need to have it all on or swap the stalks
|
|
|
Post by toddaudi on Jan 20, 2023 16:31:20 GMT
Hey, we just bought an Audi 2018 q5 quattro Premium Plus, it appears to have a camera in the rear view, unless it could be a dummy slot, and I would really like to activate the lane assist. The problem is I'm not sure i feal comfortable doing it myself unless there is a full video walkthrough somewhere showing the steps. I'm tech savvy but I haven't messed with an OBDEleven or anything similar, and just want to feel comfortable that I am doing it correctly. Any advice or tips?
|
|
|
Post by nenoff on Feb 22, 2023 12:30:40 GMT
Very soon I will make a detailed video - step by step. Keep an eye on the thread.
|
|
|
Post by meramez on Apr 9, 2023 6:00:59 GMT
Anyone knows how to activate the "Steering Correction" in the MMI? Went fine, A4 2022. The only thing was going wrong was an error message regarding "Side Assist" as my vehicle didn't have blind spot warning, excluding this and all went fine. (Lane change Assistant coding in 17 - Dash Board) My question is, how to activate the "Steering Correction" in the MMI? not my coding but i did think it would be nice to share ![:)](//storage.proboards.com/forum/images/smiley/smiley.png) link to original post below Here is the coding and adaptations that I used to activate Audi Active Lane Assist, I am not making any promises or assuming responsibility, code at your own risk, But it worked perfectly for me. I do get a few faults but I think it is due to me trying to activate Traffic Sign Recognition. UPDATE: Unchecking the option for STA in A5 coding (Byte 16->Bit 5) and you will no longer get the congestion assist fault code. You will get a few bings from your car about Pre Sense Malfunction, these will all go away once you are done. This will activate the self steering, steering wheel vibration, and lane crossing warning. Do all the coding then do adaptations. If using OBDEleven use all the directions only on the left half of the "|" symbol, if using VCDS use all the directions on the right side of the "|". UPDATE: Security codes: A5- 20103 ALL Coding: A5 - Frt Sens. Drv. Assist HC>Active | Byte 16>Bit 7 EFP>Active | Byte 12>Bit 3 17 - Dash Board (One of these may already be on, make sure both are) Lane Assistant>Active | Byte 4>Bit 6 Lane Change Assistant>Active | Byte 5>Bit 3 09 - Central Electrics Heading Control Config>heading_control | Byte 35>Bit 0 44 - Steering Assistance Heading Control Assistant>Active | Byte 2>Bit 7 ALL ADAPTATIONS: 5F - Information Electronics Car_Function_Adaptations_Gen2>menu_display_Lane_Departure_Warning = Set Value to “Activated” Car_Function_Adaptations_Gen2>menu_display_Lane_Departure_Warning_over_threshold_high = Set Value to “Activated” Car_Function_List_BAP_Gen2>LDW_HCA_0x19> Set Value to “Activated” Car_Function_List_BAP_Gen2-LDW_HCA_0x19_msg_bus> Set Value to “Terminal 15” A5 - Frt Sens. Drv. Assist BAP Personalization = Set Value to “Not Activated” Personalization of lane dept. warning Cl. 15 on = Set value to “Last Setting” System mode, lane depart. warn, = Set Value to “Selection via menu” Switch-on condition, lane depart. warn. = Set value to “On” (I had to toggle this as this is the final step that I believe mimics pressing the button to actually activate it. You know it was successful when the Lane markings show up in the VC) You can tweak the vibration intensity, warning time, and steering effort in these A5 adaptations: UPDATE Directional stabilization assist driver inact deactiv threshold (3 options) Directional stab. assist.: intensity: steering wheel vibration (3 options) Directional stab. assist.: intensity: power steering support (3 options) www.audiworld.com/forums/a4-b9-platform-discussion-212/coding-turning-audi-active-lane-assist-all-cars-pre-sense-2907906/
|
|
|
Post by nvfd103 on Apr 22, 2023 16:08:52 GMT
Question for you guys, I have a 19 s4 that I just picked up, I followed the long coding method and was given the lane assist malfunction indication, then tried the apps steps one and it says not available, my car has windshield camera, parking assist, blind spot monitoring, the 2 black spheres in the bumper corners, does it not have everything required to make ALA work? And if so what am I doing wrong?
|
|
|
Post by peppecleo on Apr 25, 2023 14:34:00 GMT
you cannot disable. only able change from early to late you have to code again to fully disable - Modulo A5 - Inserisci 20103 nel codice di sicurezza - Inserisci adattamento - Cerca: stato attivazione assistenza cambio corsia e seleziona OFF
|
|
|
Post by denizadami54 on Apr 25, 2023 19:09:40 GMT
Hello, I'm new to the forum this week, I am buying my 2017 model A6 C7 (4G) model vehicle, my question is that my vehicle is ACC, a speed limit is available, can it be coded to my vehicle active lane assist
|
|
|
Post by denizadami54 on Apr 26, 2023 23:13:22 GMT
Great info, thanks! Are you able to enable/disable it from the MMI once configured, or do you need change the coding again? Hello, I'm new to the forum this week, I am buying my 2017 model A6 C7 (4G) model vehicle, my question is that my vehicle is ACC, a speed limit is available, can it be coded to my vehicle active lane assist
|
|
oaa
New Member
Posts: 1
|
Post by oaa on Feb 18, 2024 0:00:55 GMT
UPDATE: Security codes: A5- 20103 ALL Coding: A5 - Frt Sens. Drv. Assist HC>Active | Byte 16>Bit 7 EFP>Active | Byte 12>Bit 3 17 - Dash Board (One of these may already be on, make sure both are) Lane Assistant>Active | Byte 4>Bit 6 Lane Change Assistant>Active | Byte 5>Bit 3 09 - Central Electrics Heading Control Config>heading_control | Byte 35>Bit 0 44 - Steering Assistance Heading Control Assistant>Active | Byte 2>Bit 7 ALL ADAPTATIONS: 5F - Information Electronics Car_Function_Adaptations_Gen2>menu_display_Lane_Departure_Warning = Set Value to “Activated” Car_Function_Adaptations_Gen2>menu_display_Lane_Departure_Warning_over_threshold_high = Set Value to “Activated” Car_Function_List_BAP_Gen2>LDW_HCA_0x19> Set Value to “Activated” Car_Function_List_BAP_Gen2-LDW_HCA_0x19_msg_bus> Set Value to “Terminal 15” A5 - Frt Sens. Drv. Assist BAP Personalization = Set Value to “Not Activated” Personalization of lane dept. warning Cl. 15 on = Set value to “Last Setting” System mode, lane depart. warn, = Set Value to “Selection via menu” Switch-on condition, lane depart. warn. = Set value to “On” (I had to toggle this as this is the final step that I believe mimics pressing the button to actually activate it. You know it was successful when the Lane markings show up in the VC) You can tweak the vibration intensity, warning time, and steering effort in these A5 adaptations: UPDATE Directional stabilization assist driver inact deactiv threshold (3 options) Directional stab. assist.: intensity: steering wheel vibration (3 options) Directional stab. assist.: intensity: power steering support (3 options) www.audiworld.com/forums/a4-b9-platform-discussion-212/coding-turning-audi-active-lane-assist-all-cars-pre-sense-2907906/Tried this, got numerous problems (2023 Q5 PHEV with matrix headlights and Pre-Sense City, OBDEleven 1.9.30 on iOS) A5 - Frt Sens. Drv. Assist HC>Active | Byte 16>Bit 7 EFP>Active | Byte 12>Bit 3
EFP "Coded" will not stick (it keeps reverting to "Uncoded") Turning HC on triggers a Main Beam Assist Fault and Adaptive Light Fault. 17 - Dash Board (One of these may already be on, make sure both are) Lane Assistant>Active | Byte 4>Bit 6 Lane Change Assistant>Active | Byte 5>Bit 3 09 - Central Electrics Heading Control Config>heading_control | Byte 35>Bit 0
44 - Steering Assistance Heading Control Assistant>Active | Byte 2>Bit 7
I am able to set these. I cannot do ANY of the adaptations - e.g. 5F is "Multimedia" and does not have any textual entries that resemble those in the instructions above.
|
|