|
Post by anthoooox on Jul 9, 2020 22:16:09 GMT
Hello, I have a Cupra Performance 2019. I changed the brake pads but there is no location for the wear sensor. Is it possible to disable the sensor with Obdeleven so that the fault never appears again? What is the procedure ? Sorry I'm French, it's Google translation. Thank you.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jul 10, 2020 6:34:39 GMT
On the pre facelift cars it is possible.
Go to control unit 09 Central Electrics select long coding select view 0
in the list you should have an itm called Brake pad wear options are installed / not installed.
change to not installed
|
|
|
Post by anthoooox on Jul 10, 2020 10:21:29 GMT
On the pre facelift cars it is possible. Go to control unit 09 Central Electrics select long coding select view 0 in the list you should have an itm called Brake pad wear options are installed / not installed. change to not installed Thank you. I think it's possible on a cupra facelift. Normally never a fault again?
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jul 10, 2020 10:24:20 GMT
No I have it on mine as I have a big break kit that does not have the sensors and the garage wired it up to stop the error and I have coded it off and no issues.
|
|
|
Post by anthoooox on Jul 10, 2020 10:38:14 GMT
Thank you. I'll do it with Obdeleven and see if it works properly.
|
|