|
|
Post by Carolco on Jun 14, 2020 8:19:33 GMT
Hello everyone.
i have this error in my 13 unit. I lost front assist and acc.
anyone have any information about this?
thanks
|
|
|
|
Post by newty on Jun 14, 2020 18:03:24 GMT
First: Check if the sensor is still in place and fit.
You can check the calculated misalignment in the live data. Without redoing static calibration, it is try and error to realign the sensor with the screws in between +-3° horizontal and -1/+5° vertical. Having 0°horizontal and +2 vertical is best, but not needed.
|
|
|
|
Post by Carolco on Jun 14, 2020 18:25:12 GMT
Hello Newty. The acc sensor of the car don’t have screws. It is like a rectangular box with a conector.  |
|
|
|
Post by newty on Jun 14, 2020 18:38:59 GMT
|
|
|
|
Post by Carolco on Jun 14, 2020 20:19:56 GMT
But we don’t see this screws. The mechanical of vw don’t know nothing of this.
And this screws can be touched without umpluged from the front grill?
Can you say me the position?
This is new for me
|
|
|
|
Post by Carolco on Jun 15, 2020 11:19:45 GMT
|
|
|
|
Post by Carolco on Jun 15, 2020 16:41:28 GMT
Finally with the information of Newty it was calibrated.
The error was gone. The front assist and the Acc is operational 100 %.
Thanks so much Newty
|
|
|
|
Post by nclsam on Jan 7, 2021 20:40:43 GMT
How did you calibrate the sensor? What function from OBD11 did you use? Thank you in advance!
|
|
|
|
Post by newty on Jan 11, 2021 9:34:34 GMT
MRRevo sensors do not need a strict static calibration routine.
They rely mostly on dynamic calibration in the background. That is why we couldn't find alignment screws - there aren't any.
For example, I exchanged my sensor without any calibration. Surely, you can do static calibration, but this is only needed in the prefacelift (and GTE) mounting position.
Things to do:
*Check correct placement of sensor / broken parts and VW-Logo
*Check misalignment in live data
*Enter manual alignment in adaption via engineering session.
*Test driving to see if alignment is detected and inside tolerance. Repeat steps until satisfied.
|
|
|
|
Post by drsnowmon on Mar 10, 2023 11:02:51 GMT
First of all, I apologize for bringing back a 2 year old thread back. I have a 2019 GTI S 6MT(facelift GTI) and I'm also having this error recently and the dealer is asking for $700 to calibrate it and they told me it will not be covered under the warranty which is ridiculous that VW is doing this to their customers for something we have no control over. So my question is, to manually enter the value in adaptation, do you need a paid subscription of VCDS? OBDEleven does not have functional menu to enter these values.
|
|
