|
Post by kruzymk7 on Jun 13, 2020 17:30:47 GMT
Hey everybody,
I just did some coding on my car today to get my tail lights to work properly. I have the MK7 Euro LED w/fog tails on my car, along with the DAP harness and their fog light wire, all correctly installed. The only thing that is not working properly now is the rear fog light; when the tail lights turn on, the fog is always on. I do have the Euro light switch and just coded that as well, and now the light comes up on the gauges but the rear fog still isn't working properly. Can anyone help me out, I am relatively new to OBDelven and want this to work properly without screwing anything up. Thanks in advance
|
|
|
Post by dv52 (Australia) on Jun 13, 2020 22:12:03 GMT
Hey everybody, I just did some coding on my car today to get my tail lights to work properly. I have the MK7 Euro LED w/fog tails on my car, along with the DAP harness and their fog light wire, all correctly installed. The only thing that is not working properly now is the rear fog light; when the tail lights turn on, the fog is always on. I do have the Euro light switch and just coded that as well, and now the light comes up on the gauges but the rear fog still isn't working properly. Can anyone help me out, I am relatively new to OBDelven and want this to work properly without screwing anything up. Thanks in advance
On some mk7s there was a split in the middle of MY2015 which changed the channel for the rear side marker lights from Leutchte26NSL to Leutchte27NSL. If your vehicle falls after that split you will need to perform the adaptation channel changes for the rear fogs on Leutchte27NSL.
Don
|
|