|
Post by capri1033 on Jun 7, 2020 17:01:07 GMT
Hello, How can I remove the error code 03276 - Please Check Software Version Management in modul 5f The value for channel IDE02502-Confirmation of installation change is EB21, what should the new value be to remove this error code Thank's in advance!
|
|
|
Post by AudiMS on Jun 2, 2021 18:18:49 GMT
Hello, Have you found any solution for this error code 03276? This error appear after firmware update, there is a VCDS procedure to clear this error code but can we do it with OBDeleven? Many thanks in advance!
|
|
|
Post by Thirsty on Jun 2, 2021 19:18:51 GMT
|
|
|
Post by AudiMS on Jun 5, 2021 2:42:39 GMT
Thank you for sharing the link to generate a new value. I went to Control Units > Module 5F > Adaptation > Channel 15 (Remove SVM Fault) but my old value is 0 (see image below). I don't have a 4 digit hex value 5 digit decimal value. I did try to clear the fault several times but I still get a 0 value.
|
|
|
Post by Thirsty on Jun 5, 2021 8:26:22 GMT
Is your unit stock or did you buy a hacked/patched one? Can you give us more information about your car?
|
|
|
Post by AudiMS on Jun 5, 2021 13:03:58 GMT
My car is a 2012 Audi A6 3.0T. I converted the count number 9453 to a the 5 digit decimal value 09453, and using your SVM XOR tool, the new value is 60735. Adaptation was accepted :-). Thank you for your help!
|
|
|
Post by drsdin on Sept 29, 2021 13:16:15 GMT
AudiMS Hi, How did you manage to write the new numbers? I am not able to change the value "0" on OBDEleven. Thanks in advance..
|
|