|
Post by ncodes on May 26, 2020 21:49:52 GMT
Hi guys I know iv posted before about the subject but not sure if I explained it well So I have a golf mk7 and I have upgraded my headlights to led so I have led daylight with sequential indicators plus led high beams Now when it gets dark my headlights come on and DRLs stay on great 👍 so I have noticed on some models of golfs that they have (when dark) their headlights, DRLs AND led high beams on? So I’m guessing the high beams can’t be at full brightness otherwise they would be blinding!! So my question is can I program my high beams to come on at night so I have my headlights, DRLs and high beams on? I really hope this can be done so I can have the full effect as similar golfs with similar lights as my upgrades
|
|
valk
Full Member
Posts: 112
|
Post by valk on May 27, 2020 19:11:59 GMT
Wich heaights did you install?
Led: \_ _/ Or led plus : \_\_ _/_/
|
|
|
Post by ncodes on May 31, 2020 20:27:28 GMT
Led plus I guess as mine look like this one \_ \_ _/ _/
|
|
|
Post by ncodes on Jun 4, 2020 17:33:27 GMT
Hello anyone able to help me?
|
|
valk
Full Member
Posts: 112
|
Post by valk on Jun 4, 2020 19:26:33 GMT
Can you post a picture/ photo of your headlight?
|
|
|
Post by dv52 (Australia) on Jun 4, 2020 21:53:15 GMT
^^^ncodes: there are many unknowns when someone says that they upgraded their headlight fittings to LED! It depends on many things. For example:
How the was the car factory wired; was the car originally fitted with incandescent fittings, or HIDs.
Also, did the retrofitted LED fittings require a cross-wiring harness and if so, how did the harness change the factory assignment of the pins on the hex09 module?
Finally, what is the design capabilities of the high-beam LED on the retrofitted assemblies - does the power supply for these lamps permit Pulse Width Modulation operation (meaning, does the power supply for the high-beams allow dimming- bearing in mind that high-beam lamps are normally designed for full illumination)?
Don
|
|
|
Post by ncodes on Jun 11, 2020 7:18:20 GMT
@ Valk here’s a picture of my lights @ Don I think they where originally HIDS and the new one was just plug and play had no other wiring to do I don’t know about your last question lol hope this helps thanks Nate
|
|
|
Post by ncodes on Jun 19, 2020 9:59:49 GMT
Hi guys does any of this information help?
|
|