chip
New Member
Posts: 10
|
Post by chip on May 24, 2020 10:23:13 GMT
Hi all
I’m wondering if there is a way to code so that I can have my indicators on at say 30% brightness as DRLs? I have the option enabled to turn the standard ones on and off but I’d like to run the orange as my DRLs
Help appreciated as unusual Thanks! Tom
|
|
ViĆ
Full Member
Posts: 185
|
Post by ViĆ on May 24, 2020 11:47:58 GMT
If you check Central Electrics (09) -Adapation --Leuchte 0 BLK VL B36 (Front Left indicator/turnsignal) --Leuchte1BLK VRB20 (Front Right indicator/turnsignal)
if the values inside thoose 2 adaption is set to not active/nicht aktiv/0 then I am afraid its not possible via "simple" coding.
|
|
chip
New Member
Posts: 10
|
Post by chip on May 25, 2020 5:12:29 GMT
If you check Central Electrics (09) -Adapation --Leuchte 0 BLK VL B36 (Front Left indicator/turnsignal)--Leuchte1BLK VRB20 (Front Right indicator/turnsignal)if the values inside thoose 2 adaption is set to not active/nicht aktiv/0 then I am afraid its not possible via "simple" coding. Excuse iPhone formatting again but I went into the adaptations you suggested and found these amongst other settings imgur.com/a/aFZoiKOShows nicht aktiv and other settings have what appears to be in English a dimmed light percentage
|
|
ViĆ
Full Member
Posts: 185
|
Post by ViĆ on Jun 1, 2020 15:41:12 GMT
with the new headlights Its not possible with obdeleven that I know of. Even if you add values in thoose adaptions the front indicators are not being controlled from there.
|
|