matt
Junior Member
Posts: 68
|
Post by matt on Jul 8, 2020 23:47:55 GMT
That looks reasonable. As long as you back up the code beforehand you “shouldn’t” have an issue reverting. I would do it but I definitely take more risks than others. Yeah, I most probably will as well. Made a full backup of codings and adaptations earlier today  . Matt, since you skilled guys already are thinking of the AI button, does it mean you already got the "normal" parking assist working? Parking inbetween cars, both parallel and curbside? Or are you stumbling on the physical button even for the "good old" park assist w/o hands? Can't seem to get the parallel, perpendicular parking working at the capacity of manual shifting, gas, brake, seems I'm only able to crack the AI autonomous parking - but missing the button. Would love to know if its possible to get the regular park steer assist working without the AI button, or if the AI parking is the only option on these cars. |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jul 9, 2020 12:21:27 GMT
Another question for the maneuvering assist -
When the vehicle approaches an obstacle, the radar window will pop up on the right. At that time, this function will have a slash, indicating that it is not available.
So what I want to know is whether this function is unavailable when you don't put the reverse gear or click the camera button manually.
|
|
|
|
Post by eddlund on Jul 9, 2020 18:26:34 GMT
Hi guys, really need your help now. I tried to activate MA and trailser assist, but the car didn't brake with MA, so I decided to roll back. When I roll back the settings, I got 2 errors when I start the car.
SOS emergency stop fault and Start/stop fault. If I activate the Manuvering assist in 44 and A5 module again, the SOS fault disappear. But comes back when I remove the coding again.
Fault codes in OBD eleven is the one in A5 regarding SOS and a constant in 01 that says "lost communication with body control module" as I suspect has to do with the Start/stop else it have been there before I started the MA coding.. The code in 19 also takes away the A5 module from the gateway list so I must add it back.
I only did the steps above and have double checked the history and the roll back is correct. I even tried to roll back in different variants with A5 first then 44 and so on without result. What should I do? Disconnect the battery or can it be even worse?
|
|
|
|
Post by beatx5 on Jul 9, 2020 18:32:12 GMT
Maneuvering assist
I've done the following coding with ODBEleven:
STG 09 > Adaptation: MAS12843-Maneuvering brake function,activated ,1
STG 44 > coding > Byte 02 > Bit 1 auf "Maneuvering assistant,0=not active / 1=active"
STG A5 > Coding > Byte 44 > Bit 5 auf "MA_sterring,active"
STG A5 > Coding > Byte 44 > Bit 6 auf "MA_breaking,active"
STG A5 > Coding > Byte 44 > Bit 7 auf "MA_maneuver_assist,installed"
STG 19 > Parking assist > coded
STG 03 > Coding > Byte 10 - Bit 0 - Activate
STG 03 > Coding > Byte 24 - Bit 7 - Activate
Unfortunately when I try to code the STG 44 / Byte 02 / Bit 1 to active I always receive the following error message: "Function cancelled, marginal conditions have not been met." Have done this through adaption menu line and through Byte coding. Same result. Rebooted MMI several times, did open the hood, I've tried to use the security access which is available for STG 44 - but no success.
With all other coding I had no trouble. Is there a specific other security access code?
Thanks for suggestions :-)
|
|
matt
Junior Member
Posts: 68
|
Post by matt on Jul 9, 2020 19:37:07 GMT
Hi guys, really need your help now. I tried to activate MA and trailser assist, but the car didn't brake with MA, so I decided to roll back. When I roll back the settings, I got 2 errors when I start the car. SOS emergency stop fault and Start/stop fault. If I activate the Manuvering assist in 44 and A5 module again, the SOS fault disappear. But comes back when I remove the coding again. Fault codes in OBD eleven is the one in A5 regarding SOS and a constant in 01 that says "lost communication with body control module" as I suspect has to do with the Start/stop else it have been there before I started the MA coding.. The code in 19 also takes away the A5 module from the gateway list so I must add it back. I only did the steps above and have double checked the history and the roll back is correct. I even tried to roll back in different variants with A5 first then 44 and so on without result. What should I do? Disconnect the battery or can it be even worse? I had the same issue in the past, one time was due to the battery draining too much from coding for awhile. Drove it for an hour or two and it went away. One time the solution was to turn off, lock, and walk away from the car for 5-10 mins. Came back. All was well. |
|
matt
Junior Member
Posts: 68
|
Post by matt on Jul 9, 2020 19:38:53 GMT
Maneuvering assist I've done the following coding with ODBEleven: STG 09 > Adaptation: MAS12843-Maneuvering brake function,activated ,1 STG 44 > coding > Byte 02 > Bit 1 auf "Maneuvering assistant,0=not active / 1=active" STG A5 > Coding > Byte 44 > Bit 5 auf "MA_sterring,active" STG A5 > Coding > Byte 44 > Bit 6 auf "MA_breaking,active" STG A5 > Coding > Byte 44 > Bit 7 auf "MA_maneuver_assist,installed" STG 19 > Parking assist > coded STG 03 > Coding > Byte 10 - Bit 0 - Activate STG 03 > Coding > Byte 24 - Bit 7 - Activate Unfortunately when I try to code the STG 44 / Byte 02 / Bit 1 to active I always receive the following error message: " Function cancelled, marginal conditions have not been met." Have done this through adaption menu line and through Byte coding. Same result. Rebooted MMI several times, did open the hood, I've tried to use the security access which is available for STG 44 - but no success. With all other coding I had no trouble. Is there a specific other security access code? Thanks for suggestions :-) I didn’t need any security access to code mine; if the hood is open it should be ok too. Potentially may be the order in which it’s coded though with 44 I’ve never run into this. Have you completed all of the other coding? |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jul 9, 2020 20:02:21 GMT
Maneuvering assist I've done the following coding with ODBEleven: STG 09 > Adaptation: MAS12843-Maneuvering brake function,activated ,1 STG 44 > coding > Byte 02 > Bit 1 auf "Maneuvering assistant,0=not active / 1=active" STG A5 > Coding > Byte 44 > Bit 5 auf "MA_sterring,active" STG A5 > Coding > Byte 44 > Bit 6 auf "MA_breaking,active" STG A5 > Coding > Byte 44 > Bit 7 auf "MA_maneuver_assist,installed" STG 19 > Parking assist > coded STG 03 > Coding > Byte 10 - Bit 0 - Activate STG 03 > Coding > Byte 24 - Bit 7 - Activate Unfortunately when I try to code the STG 44 / Byte 02 / Bit 1 to active I always receive the following error message: " Function cancelled, marginal conditions have not been met." Have done this through adaption menu line and through Byte coding. Same result. Rebooted MMI several times, did open the hood, I've tried to use the security access which is available for STG 44 - but no success. With all other coding I had no trouble. Is there a specific other security access code? Thanks for suggestions :-) I didn’t need any security access to code mine; if the hood is open it should be ok too. Potentially may be the order in which it’s coded though with 44 I’ve never run into this. Have you completed all of the other coding? When the vehicle approaches an obstacle, the radar window will pop up on the right. At that time, this function will have a slash, indicating that it is not available. So what I want to know is whether this function is unavailable when you don't put the reverse gear or click the camera button manually. |
|
|
|
Post by beatx5 on Jul 9, 2020 20:25:30 GMT
Maneuvering assist:
All other coding I've done. I've repeated the coding a few times. Always same troubles with STG 44.
MMI version: MH2p_ER_AUG35_P2711
Audi A8 2019 / Germany - Switzerland
|
|
matt
Junior Member
Posts: 68
|
Post by matt on Jul 9, 2020 20:38:46 GMT
I didn’t need any security access to code mine; if the hood is open it should be ok too. Potentially may be the order in which it’s coded though with 44 I’ve never run into this. Have you completed all of the other coding? When the vehicle approaches an obstacle, the radar window will pop up on the right. At that time, this function will have a slash, indicating that it is not available. So what I want to know is whether this function is unavailable when you don't put the reverse gear or click the camera button manually. MA for me only comes up and is activated when I click the park sensors button. I think this is by design because if you are at a stop light and activate it it will try to steer around the car in front of you. When the parking screen comes up you can tap on the icon with the slash to enable it though. |
|
jd
New Member
Posts: 32 
|
Post by jd on Jul 9, 2020 21:01:59 GMT
So, a couple more questions.
First, once coded then, it sounds like it is only on when you activate by pressing the icon with the slash on it?
How do you do both coding of the bits in stg 44 at the same time. For me, it requires me to set one and activate that, then go to the next one and and set it and activate it.
|
|
matt
Junior Member
Posts: 68
|
Post by matt on Jul 9, 2020 21:38:45 GMT
So, a couple more questions. First, once coded then, it sounds like it is only on when you activate by pressing the icon with the slash on it? How do you do both coding of the bits in stg 44 at the same time. For me, it requires me to set one and activate that, then go to the next one and and set it and activate it. MA is automatically activated when I bring up the parking cameras. For me at least. I believe someone had been coding this with OBDEleven a little bit of a way back by noting the hex changes and writing the whole code at once |
|
|
|
Post by andreask on Jul 9, 2020 21:43:31 GMT
So, a couple more questions. First, once coded then, it sounds like it is only on when you activate by pressing the icon with the slash on it? How do you do both coding of the bits in stg 44 at the same time. For me, it requires me to set one and activate that, then go to the next one and and set it and activate it. JD, look at my post 22hrs back.. have not done it yet, but that would be how I would go at it when I get time ;-).. |
|
|
|
Post by andreask on Jul 9, 2020 22:23:33 GMT
So, a couple more questions. First, once coded then, it sounds like it is only on when you activate by pressing the icon with the slash on it? How do you do both coding of the bits in stg 44 at the same time. For me, it requires me to set one and activate that, then go to the next one and and set it and activate it. JD, look at my post 22hrs back.. have not done it yet, but that would be how I would go at it when I get time ;-).. Wife and kids keeping me busy.. so much to tweak, soo little time ;-/ |
|
|
|
Post by ustolle on Jul 10, 2020 14:38:48 GMT
Hi guys, really need your help now. I tried to activate MA and trailser assist, but the car didn't brake with MA, so I decided to roll back. When I roll back the settings, I got 2 errors when I start the car. SOS emergency stop fault and Start/stop fault. If I activate the Manuvering assist in 44 and A5 module again, the SOS fault disappear. But comes back when I remove the coding again. Fault codes in OBD eleven is the one in A5 regarding SOS and a constant in 01 that says "lost communication with body control module" as I suspect has to do with the Start/stop else it have been there before I started the MA coding.. The code in 19 also takes away the A5 module from the gateway list so I must add it back. I only did the steps above and have double checked the history and the roll back is correct. I even tried to roll back in different variants with A5 first then 44 and so on without result. What should I do? Disconnect the battery or can it be even worse? I had the same issue in the past, one time was due to the battery draining too much from coding for awhile. Drove it for an hour or two and it went away. One time the solution was to turn off, lock, and walk away from the car for 5-10 mins. Came back. All was well. I also got the start stop error when I was looking for the coding I module 03. I removed the minus pole from the battery in the trunk for a couple of minutes. After that the error was gone. You can remove it without any risk |
|
|
|
Post by eddlund on Jul 10, 2020 21:10:03 GMT
I had the same issue in the past, one time was due to the battery draining too much from coding for awhile. Drove it for an hour or two and it went away. One time the solution was to turn off, lock, and walk away from the car for 5-10 mins. Came back. All was well. I also got the start stop error when I was looking for the coding I module 03. I removed the minus pole from the battery in the trunk for a couple of minutes. After that the error was gone. You can remove it without any risk Thanks Will try it out tomorrow! Did the braking work for you afterwards, or did you roll back the code ? |
|
|
|
Post by angrypenguin on Jul 11, 2020 13:27:52 GMT
In order to meet the marginal conditions your car needs to have the engine on but ACC on. So what I mean by that is you know that state of your car when you get in, click the 'start engine' button without holding the brake? Do that, and it'll work. I can't get MA to work for the life of me, but I did get around the STG44 instruction. |
|
jd
New Member
Posts: 32
|
Post by jd on Jul 11, 2020 15:18:13 GMT
In order to meet the marginal conditions your car needs to have the engine on but ACC on. So what I mean by that is you know that state of your car when you get in, click the 'start engine' button without holding the brake? Do that, and it'll work. I can't get MA to work for the life of me, but I did get around the STG44 instruction. LOL. You are ahead of me. A couple of things that would help for me would be: 1. Are you coding a US car or European car. 2. A video of a walkthrough on both MA and PA of the step by step coding. Some of us are not as techy as others. I am still confused about how to code the stage 3 at one time. I don’t have a clue about hex. |
|
|
|
Post by ustolle on Jul 11, 2020 17:12:48 GMT
I also got the start stop error when I was looking for the coding I module 03. I removed the minus pole from the battery in the trunk for a couple of minutes. After that the error was gone. You can remove it without any risk Thanks Will try it out tomorrow! Did the braking work for you afterwards, or did you roll back the code ? Yes the brakes is working for me, in regard to the MA function, and coding if the 03 module. The start stop error I had when I was rolling bact the coding for the parking assist. Even though all the codingfor PA was removed the error was still there. After removing the battery pole, everything was back to normal again |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jul 11, 2020 17:59:43 GMT
By the way, did you guys see this error before in Unit A5?  |
|
|
|
Post by andreask on Jul 11, 2020 18:43:34 GMT
In order to meet the marginal conditions your car needs to have the engine on but ACC on. So what I mean by that is you know that state of your car when you get in, click the 'start engine' button without holding the brake? Do that, and it'll work. I can't get MA to work for the life of me, but I did get around the STG44 instruction. LOL. You are ahead of me. A couple of things that would help for me would be: 1. Are you coding a US car or European car. 2. A video of a walkthrough on both MA and PA of the step by step coding. Some of us are not as techy as others. I am still confused about how to code the stage 3 at one time. I don’t have a clue about hex. Jd, on the hex part, have you tried using a binary-to-hex online converter? |
|
jd
New Member
Posts: 32
|
Post by jd on Jul 11, 2020 19:43:15 GMT
LOL. You are ahead of me. A couple of things that would help for me would be: 1. Are you coding a US car or European car. 2. A video of a walkthrough on both MA and PA of the step by step coding. Some of us are not as techy as others. I am still confused about how to code the stage 3 at one time. I don’t have a clue about hex. Jd, on the hex part, have you tried using a binary-to-hex online converter? I don’t know what that is. Sorry. |
|
|
|
Post by beatx5 on Jul 12, 2020 0:44:56 GMT
MA
I was able to do all the coding but I had the same results like fatjon
I've an A8 from Germany.
I've changed all the settings backward but have now the error "PA dysfunction".
I saw that maybe the battery should be disconnect.... Did somebody had success to bring this error message away? And if I have to disconnect the battery where should I do that?
Thanks from Switzerland :-)
|
|
matt
Junior Member
Posts: 68
|
Post by matt on Jul 12, 2020 2:30:23 GMT
MA I was able to do all the coding but I had the same results like fatjon I've an A8 from Germany. I've changed all the settings backward but have now the error "PA dysfunction". I saw that maybe the battery should be disconnect.... Did somebody had success to bring this error message away? And if I have to disconnect the battery where should I do that? Thanks from Switzerland :-) Hi! Can you please post the coding for modules 09, 17, A5, and 44? Also does your car have the automated parallel park assist? |
|
jd
New Member
Posts: 32
|
Post by jd on Jul 12, 2020 2:51:20 GMT
MA I was able to do all the coding but I had the same results like fatjon I've an A8 from Germany. I've changed all the settings backward but have now the error "PA dysfunction". I saw that maybe the battery should be disconnect.... Did somebody had success to bring this error message away? And if I have to disconnect the battery where should I do that? Thanks from Switzerland :-) You shouldn’t disconnect the battery. Get out, park the car and lock the doors. Leave it for 15 minutes. The car should reset itself. Start it up after the 15 minutes and it should have reset itself. |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jul 12, 2020 3:11:42 GMT
MA I was able to do all the coding but I had the same results like fatjon I've an A8 from Germany. I've changed all the settings backward but have now the error "PA dysfunction". I saw that maybe the battery should be disconnect.... Did somebody had success to bring this error message away? And if I have to disconnect the battery where should I do that? Thanks from Switzerland :-) Hi! Can you please post the coding for modules 09, 17, A5, and 44? Also does your car have the automated parallel park assist? I went to Audi Germany website and I can confirm the Audi A8 has Parking Assistant which allow auto parking. If we can get the code from our friend, that will be excellent.  |
|
|
|
Post by eddlund on Jul 12, 2020 6:39:00 GMT
I’ve tried leaving the car for hours and rolled back the code in different ways, without result. But just lose and holding the negative clamp above the battery for a second did the trick. Now all fault codes are gone, will try with the trailer assist first then parking before I try the brakes for MA again..
|
|
|
|
Post by beatx5 on Jul 12, 2020 7:21:09 GMT
MA
I've only the OBDEleven device but I will try to export for the modules 09, 17, A5, and 44. But my car does not have automated parallel park assist.
I've already closed the car for several hours but the error "PA dysfunction" is still there.
Where and how exactly should I remove the negative clamp? I saw the battery is on the right side of the trunk. Or any other ideas for to remove the error?
|
|
|
|
Post by eddlund on Jul 12, 2020 8:00:15 GMT
MA I've only the OBDEleven device but I will try to export for the modules 09, 17, A5, and 44. But my car does not have automated parallel park assist. I've already closed the car for several hours but the error " PA dysfunction" is still there. Where and how exactly should I remove the negative clamp? I saw the battery is on the right side of the trunk. Or any other ideas for to remove the error? Yes roll back all the codes, then on the right hand side in the trunk you’ll see the battery. I couldn’t remove the clamp because of some things above the battery in height. But just loose the clamp a lot and keep in the middle so it doesn’t touch the battery. It worked for me! |
|
|
|
Post by beatx5 on Jul 12, 2020 8:24:40 GMT
You mean the red marked plug? Attachments:
|
|
|
|
Post by eddlund on Jul 12, 2020 10:20:05 GMT
No, on top of the battery.
|
|
. 
